[ 3 ] Removing the Sub PCB*, Main PCB, and Rubber Key Pad
(1) European version: Remove the two screws from the sub PCB*.
(2) Remove the two screws from the main PCB.
(3) Slightly slide the main PCB to the front, press the latches provided on the body
cover outwards, and then take out the LCD by gently pulling out the main PCB and
LCD flat cable.
(4) Take out the rubber key pad.
Figure 2.2-8 Taking out the Main PCB and Rubber Key Pad from the Body Cover
Taking out the Sub PCB*
Figure 2.2-7
II - 11
*Provided on the European version.