7 ] Removing The Cutter-Related Components - Brother PT-2500PC Service Manual

[ 7 ] Removing the Cutter-related Components

(1) Take off the cutter ASSY by removing two screws "a."
WARNING: Be careful with the cutter blades.
(2) Remove the washer (by using a pin) and take off the cutter moving gear and cutter
double gears.
NOTE: Once deformed excessively, the washer becomes unusable and a new one
should have to be put back in.
(3) Take off the cutter motor ASSY by removing two screws "b."
(4) Take off the cutter sensor ASSY by removing screw "c."
(5) Remove the cutter sensor actuator.
Fig. 2.2-14 Removing the Cutter-related Components
II - 18