[ 5 ] Installing the ON/OFF Button, FEED/CUT Button, and Sub PCB ASSY to the Front
Cover
(1) As illustrated below, insert the tabs of the reflection sheet in the two guide of the
ON/OFF button.
(2) Set the key return spring on the ON/OFF button and put them back into place.
(3) Set the key return spring on the FEED/CUT button and put them back into place.
(4) Secure the sub PCB ASSY with the two screws.
Fig. 2.2-28 Installing the ON/OFF Button, FEED/CUT Button, and Sub PCB ASSY
II - 28