Table of Contents
Advertisement
(5) Disconnect the sensor PCB flat cable and the tape end sensor harness from the
main PCB.
NOTE: When disconnecting the harness connector, hold the connector body not
the cable.
(6) Disconnect the sub PCB flat cable from the main PCB.
Fig. 2.2-5 Disconnecting the Sensor PCB Flat Cable, Tape End Sensor Harness, and Sub PCB Flat
Cable from the Main PCB
II - 12
- Quick Links:
- Pc Interface
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
