Table of Contents
Advertisement
"Track exchange" is the function that exchanges tracks -- all real tracks and all additional tracks--
currently in the programs, in mono track units or in multiple track (Stereo pair 2 tracks; 8 track
units) units. In other words, exchanging tracks in any combination, as shown below, means that
data recorded on those tracks will be relocated. This function enables effective use of tracks. Not
only will it be possible to make exchanges between real tracks but, by dumping a real track to a
blank additional track, another blank real track is created for future recording.
However, since data in this additional track cannot be directly played back in real time, if the data
need to be played back or edited, it must be moved to a real track.
Also, as explained in the previous "Erase," "Track Exchange" is necessary when checking REC END in
the additional track.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
<Note>: In the " Format conversion of the additional track " menu of the SETUP mode, the range of tracks that can be
exchanged will be 1-24 in the current drive in which the " V2 (56) " format was converted to " V1 (24) " format. For
details on the "Format conversion of the additional track" menu, refer to the SETUP mode on page " 132 ."
• Execution of Track Exchange
<Note>: You can carry out the track exchange func-
tion only when the " Chain Play? " menu in the Setup
mode is set to " Off ." If you press the [EDIT] key when
this menu is not set to " Off ," " Void Chain Play! " is
shown and the operation is ignored.
If " Void Chain Play! " is shown, set the " Chain Play? "
menu to " Off ."
(1)
In the stop mode, press the [EDIT] key to display
"TRK Exch.Mono?" or "TRK Exch.Group?."
Select "TRK Exch.Group?" to exchange tracks in 2
track (stereo pair)/8 track units, and
"TRK Exch.Mono?" to exchange in mono track units.
• Exchanging in group units
OL
0
3
6
9
12
18
24
30
42
1
2
3
4
5
6
7
8
9
Exchange in 2 track (stereo pair) units
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Exchange in mono track units
Exchange in 8 track units
Flashing
OL
BIT
24
0
3
6
9
12
18
CLOCK
24
INT
30
42
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Model D2424LVmkII Reference Manual (Editing Tracks)
Track Exchange
Exchange in 8 track units
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
• Exchanging in mono units
(2)
After either is displayed, press the [EXECUTE/YES]
key.
The display will change to selecting the tracks for
exchanged. To actually select the tracks, please refer
to the next page.
FS
kHz
77
Track 49
Track 50
Track 51
Track 52
.........................
Track 53
Track 54
Track 55
Track 56
Flashing
OL
0
3
6
9
12
18
24
30
42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OL
24
BIT
0
3
FS
6
9
kHz
12
18
CLOCK
24
INT
30
42
21
22
23
24
Advertisement
Chapters
Table of Contents
