Explanation On The Status Reply - Fostex D2424LVmk2 Reference Manual

Model D2424LVmkII Reference Manual (MIDI Implementation Chart/MMC List)
23 49: vari pitch status request
The command for inquiring status of vari pitch on/off and
vari pitch data. When this command is received, this
equipment replies with "33 49 (<count=3><on/off><vari
data>)."
24 01 (<event number>): signature map request
The command for inquiring the meter setup.
Order number counting from the leading tune must be
specified in the event number (The first event is expressed
as "event number=00." When this command is received,
this equipment replies with "34 01 (<signature map>)."
24 02 (<event number>): Tempo set map request
The command for inquiring tempo data
Order number from the leading tune must be specified in
the event number (The first event is expressed as "event
number=00."
When this command is received, this equipment replies
with "34 02 (<tempo set map>)."
24 04: preroll time status request
The command for inquiring the preroll time setup status.
When this command is received, this equipment replies
with "34 04 (<mmc time>)."
24 05: remain time request
The command for inquiring the disk remaining time which
is recordable. When this command is received, this
equipment replies with "34 05 (<mmc time>)."
24 06: frame rate status request
The command for inquiring the frame rate setup status.
When this command is received, this equipment replies
with "34 06 (<frame rate>)."
24 08: time base status
The command for inquiring the setup status of the time
base shown in the display. When this command is received,
this equipment replies with "34 08 (<time base>)."

Explanation on the Status Reply

32 21 (<loop op.mode>): loop operation mode status repry
This is the reply against the "22 21" loop operation status
request command. <loop op.mode=12> is the only status
data of D2424LVmkII and any other setting is not permis
sible.
32 22 (<on/off>): loop on/off status reply
This is the reply against "22 22" loop on/off status request.
32 28 (<post locate mode>): post locate mode status reply
This is the reply against "22 28" post locate status request.
<post locate mode=12 or 15> is the only status data of
D2424LVmkII and any other setting is not permissible.
32 2D (<edit message>): auto rec status reply
This is the reply against the "12 2D" auto rec command or
the "22 2D" auto rec status request.
32 41 (<lock status>): lock status repry
This is the reply against the "22 41" lock status request.
32 42 (<lock mode>): lock mode status reply
This the reply against the "22 42" lock mode status
request.
32 45 (<edit message>): copy clip status reply
This is the reply against the "12 45" copy clip command or
the "22 45" copy clip status request.
32 46 (<edit message>): copy paste status reply
32 46 (<edit message><mmc time>): copy paste status reply
This is the reply against the "12 46" copy paste command
or the "22 46" copy paste status request. <mmc time>
indicates the unprocessed time until completion of copy
paste editing.
32 47 (<edit message>): erase status reply
32 47 (<edit message><mmc time>): erase status reply
This is the reply against "12 47" erase command or
"22 47" erase status request.
32 49 (<edit message><count><mmc track>): clipboard play
status reply
This is the reply against the "12 49" clipboard play
command. If there is no sound data in the clipboard,
"32 49"(<edit message=14 (void data)>)" will be replied.
<mmc track> indicates the sound data track number.
32 4A (<edit message>): undo status reply
This is the reply against the "12 4A" undo command.
Either <edit message=01 (completed) or <edit message=14
(void data)> will be replied.
32 4B (<edit message>): redo status reply
This is the reply against the "12 4B" redo command.
Either <edit message=01 (completed)> or <edit message=14
(void data)> will be replied.
32 4D (<edit message>): move clip status reply
This is the reply against the "12 4D" move clip command
or "22 4D" move clip status request.
32 4E (<edit message>): move paste status reply
32 4E (<edit message><mmc time>): move paste status re-
ply
The reply against the "12 4E" move paste command or the
"22 4E" move paste status request. <mmc time> indicates
the unprocessed time until completion of move paste
editing.
32 4F (<edit message>): track exchange status reply
This is the reply against the "12 4F" track exchange
command.
33 3E (<edit message>): product new program status reply
This is the reply against the "13 3E" product new program
command.
33 41 (<channel><channel>): digital in channel status reply
33 41 (<channel=7F><count><mmc track>): adat in status
reply
This is the reply against the "23 41" digital in ch. st.
request.
The first <channel> indicates the track number assigned
to the L channel of the digital audio signal (S/P DIF) from
the DATA IN connector, and the second <channel> the track
number assigned to the R channel.
If digital in is set to "Adat," the reply for the first
<channel> will be 7F and then <count> <mmc track>, in
this order. In the <mmc track>, the track bit map which is
the Adat input, is expressed by "1" (In this equipment, the
track actually locked is expressed as "1").
138