Table of Contents
Advertisement
2. Preset Display
The display below shows all preset items for explanation purpose.
Level meter
Displays recorder output
level or recording level
for each track.
In the programs to 96
kHz 24 bits or 88.2 kHz
24 bits, only tracks 1-8
will function.
Track indications
Each frame will blink when the track is READY, be extinguished in the SAFE
mode and be lighted during recording. In the program to 96 kHz / 24 bits
and 88.2kHz 24bits, only tracks 1-8 will function.
Lights up when ABS is selected as Time base.
ABS
Lights up when MTC is selected as Time Base.
MTC
Lights up to indicate a bar/beat/clock value when
SIGNATURE
BAR/BEAT/CLK is selected as Time Base.
Lights up when the recorder enters data edit mode,
enabling you to edit data. Pressing the LOCATE
LOCATE
key while this indicate is lit will cause the recorder
to locate the position of the displayed time or the
bar/beat/clock value.
Lights up to indicate available recording time and
REMAIN
space on the disk.
MTC IN
With the optional Model 8346 TC/SYNC card
installed, this will be lit when MTC or LTC is
TC IN
externally input.
Lights up when MTC OFFSET menu is selected
MTC OFFSET
in SETUP mode.
Flashes when "Slave mode" is turned on.
CHASE
When a signal is locked, the flashing indicator lights
up steadily.
PGM
Lights up to indicate the current program number.
Lights up when the tempo setting menu is selected
TEMPO
in SETUP mode.
Sampling frequency/quantization at formatting
BIT 16, 24
are displayed. This will also blink to warn that
FS
digital signals (S/P DIF or adat) of a wrong
Hz
sampling frequency are being input.
This message is shown to confirm whether or not
SURE?
you wish to execute a certain operation.
Model D2424LVmkII Reference Manual (Names and Functions)
35 dot message display
This display indicates the ABS time, MTC time value or bar/beat/clock value,
and a parameter name in the SETUP mode.
SETUP
COMPLETED! SURE?
OL
OL
0
0
3
3
6
6
9
9
15
12
20
18
25
24
30
30
40
42
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DIGITAL
LTC MTC IN ABSCHASE OFFSET LOCATE GEN UB REMAIN
H
These will light when locked to digital in and "-" for
the track set to digital-in will light up.
This indication lights up when the recorder
MIDI
receives effective MIDI message from an external
MIDI device.
When the recorder enters save function mode, the
SAVE
selected parameter name will appear here.
When the recorder enters load function mode,
LOAD
the selected parameter name will appear here.
This lights when a digital input track is set and a
DIGITAL
digital signal is correctly input. It will blink if the
digital signal is not correctly input.
This message indicates that an operation such
COMPLETED!
as copy, move and paste has been completed.
This lights up when the D2424LVmkII is
INT
operating using the internal clock.
This lights up when the D2424LVmkII is
EXT
operating in sync with an external sync signal.
This lights up together with display of "EXT"
WORD
when the D2424LVmkII is in sync with an
external word signal.
This lights up together with display of "EXT"
VIDEO
when the D2424LVmkII is in sync with an
external video signal.
<Note>
When D2424LVmkII is not in sync with external sync
signals (word/video) and digital IN signals, " EXT ",
" WORD ", " VIDEO " or " DIGITAL " display will blink.
If this display is blinks, inspect the connectors and
cables between external digital equipment and check
that sync signals or digital signals from external
equipment are correctly input.
This blinks when the recorder is entered in the
TC READY mode by pressing the [EDIT] key
TC RDY
while holding down the [SHIFT] key, and will
light during recording of TC.
21
M
S
F
SF
MB
BAR
CLK
PGM
%
OL
OL
BIT
16
24
0
0
3
3
FS
6
6
9
9
kHz
12
15
CLOCK
20
18
24
25
INT
30
30
EXT
MIDI
40
42
WORD
CHASE
VIDEO
DIGITAL
TC RDY
DIGITAL
Advertisement
Chapters
Table of Contents
