Chapter 2
4
Put paper in the paper tray.
PAPE R
LABE L
TRAN SPAR ENCY
5
Put the paper tray firmly back in the
machine and unfold the output paper
tray support flap before you use the
machine.
Note
When you put paper in the paper tray, please
remember the following:
■
Check that the paper is flat in the tray and
below the maximum paper mark, and that
the paper guides are touching the sides of
the paper stack.
■
The side to be printed on must be face up.
2 - 9
ENV ELOP E
CAR DSTO CK
Output paper
tray support flap
Printing on envelopes
Adjust the paper length and width guides to fit
the envelopes that are going to be used.
You can load envelopes into the standard
paper tray only.