Ricoh Aficio SP C210SF User Manual page 2

Hide thumbs Also See for Aficio SP C210SF:
Table of Contents

Advertisement

Introduction
This manual describes detailed instructions on the operation and notes about the use of this machine.
To get maximum versatility from this machine all operators are requested to read this manual carefully and
follow the instructions. Please keep this manual in a handy place near the machine.
Power Source
220-240 V, 50/60 Hz, 6 A or more
Please be sure to connect the power cable to a power source as above.
Operator Safety:
This printer is considered a class 1 (3B) laser device, safe for office/ EDP use. The printer contains 5 milliwat,
780 - 800 nanometer wavelength, AlGaAs Laser Diode. Direct (or indirect reflected) eye contact with the laser
beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed
to prevent any possible laser beam exposure to the operator.
The following label is attached on right side of the printer.
Laser Safety:
The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.
The laser subsystem is replaceable in the field by a qualified customer engineer. The laser chassis is not
repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems
to the factory or service depot when replacement of the optical subsystem is required.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be liable for
direct, indirect, special, incidental, or consequential damages as a result of handling or operating the
machine.
Caution:
Use of controls or adjustment or performance of procedures other than those specified in this manual might
result in hazardous radiation exposure.
Do not make copies of any item for which copying is prohibited by law.
Copying the following items is normally prohibited by local law:
Bank bills, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This printer
contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, the supplier recommends that you use genuine toner, maintenance kits and parts from
the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of
consumables (toner, maintenance kits and parts) other than genuine consumables from the supplier with
your office products.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents