Telnet; Configuring The Device - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Configuring the Device

Note

Telnet

Configuring the Device
Cisco 11000 Series Secure Content Accelerator Configuration Guide
4-6
When prompted to supply a file name during serial management,
you must supply it as a URL in the form of
HOST/PATH/FILENAME using the http://, https://, ftp://, or tftp://
prefix.
After you have assigned an IP address to the Cisco Secure Content Accelerator
using the serial console CLI, you can connect to the appliance via telnet.
1. Initiate a telnet session with the IP address previously assigned to the
appliance.
An SCA> prompt is displayed.
2.
When prompted to supply a file name during a telnet
Note
management session, you must supply it as a URL in the
form of HOST/PATH/FILENAME using the http://, https://,
ftp://, or tftp:// prefix.
When you configure an appliance to perform SSL offloading you are actually
setting up one or more logical secure servers whose SSL-related configurations
reside in the appliance. Each logical secure server has several attributes:
A unique IP address for the real server providing content
•
Specifications for the appropriate key and certificate to use
•
• A security policy specifying the cryptographic scheme(s) to use
Chapter 4 Using the Configuration Manager
78-13124-05