Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual page 222

Top Level Command Set
Table C-3
Error
SSL Accept Errors
SSL System Write Errors to
client
SSL Write Broken Connection
Error to client
SSL System Read Errors from
client
SSL Read Broken Connection
Error from client
System Write Errors to remote
server
Broken Connection Write Errors
to remote server
System Read Errors from remote
server
Broken Connection Read Errors
from remote server
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-30
Output Description for show ssl errors (continued)
Appendix C
Description
Generated when SSL connection acceptance
fails; eight states are recognized:
0 SSL_ERROR_NONE
1 SSL_ERROR_SSL
2 SSL_ERROR_WANT_READ
3 SSL_ERROR_WANT_WRITE
4 SSL_ERROR_WANT_X509_LOOKUP
5 SSL_ERROR_SYSCALL
6 SSL_ERROR_ZERO_RETURN
7 SSL_ERROR_WANT_CONNECT
Generated when an error occurs when writing
to a client
Generated when writing to the client after the
client has reset the connection
Generated when an error occurs when
reading from a client
Generated when reading from a client after
the client has reset the connection
Generated when an error occurs when writing
to a remote server
Generated when writing to a remote server
after the remote server as reset the connection
Generated when reading from a remote server
Generated when reading from a remote server
after the remote server as reset the connection
Command Summary
78-13124-05