Certificate Group Configuration Command Set; Cert; End - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Configuration Command Set

Certificate Group Configuration Command Set

cert

Syntax Description
Usage Guidelines
Related Commands

end

Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-122
Use Certificate Group Configuration commands to set up and manage certificate
groups utilized for certificate chains and server and client certificate
authentication. Enter Certificate Group Configuration mode by using the enable
command in Non-Privileged mode, the configure command in Privileged mode,
the ssl command in Configuration mode, and the certgroup command in SSL
Configuration mode. The prompt changes to
<config-ssl-certgroup[certgroupname]>>
Adds the specified, existing certificate object into the current certificate group.
cert <certObject>
no cert <certObject>
certObject
Availability: Serial, Telnet; FIPS Mode (serial only)
Up to 64 certificate objects are allowed per certificate group. Use the no form of
the command to remove the specified certificate from the certificate group.
cert (SSL Configuration Command Set)
See the section "Certificate Configuration Command Set".
Exits Certificate Group Configuration mode, activates all changes, and returns to
SSL Configuration mode.
end
Availability: Serial, Telnet; FIPS Mode (serial only)
.
The name of the certificate object.
Appendix C Command Summary
78-13124-05