Figure 5-36 Add Certificate Group Example - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

SSL Configuration Examples
3.

Figure 5-36 Add Certificate Group Example

4.
5.
6.
Follow the steps below to assign the certificate group to a secure server.
1.
2.
3.
4.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
5-36
Click Add Certificate Group. The Add Certificate Group window opens,
as shown in Figure 5-36.
Type the name for the group in the Certificate Group Name text box.
Click and CTRL+click the certificates listed in the Member Certificates list
box to add to the certificate group. You can also click and SHIFT+click either
end of a contiguous group of certificates to select all certificates in it.
Click OK to add the certificate group to the device.
Click SSL to activate the SSL tabs.
Click the Secure Servers tab.
Either click Edit next to an existing secure server, or click Add Secure
Server to create a new server. The appropriate secure server window opens.
Locate the Server Certificate and Security Policy panel.
Chapter 5 Graphical User Interface Reference
78-13124-05