Pem-Paste - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix C Command Summary
Usage Guidelines
Related Commands

pem-paste

Usage Guidelines
78-13124-05
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not enter the URL, you are prompted for it. If a password is required,
you are prompted for it.
pem-paste (Key Configuration Command Set)
Allows a PEM-encoded X.509 key to be pasted into the configuration manager.
pem-paste
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste a key from the cut buffer.
You can use a text editor to copy the key from a file. After the key is pasted, you
must press Enter twice to complete the command. If a password is required, you
are prompted for it.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Configuration Command Set
C-129