Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual page 334

Configuration Command Set
Cryptographic Scheme
DES-CBC3-SHA
DES-CBC-MD5
DES-CBC-SHA
EXP-ARC2-MD5
EXP-ARC4-MD5
EXP-DES-CBC-SHA
EXP1024-ARC2-CBC-MD5
EXP1024-ARC4-MD5
EXP1024-ARC4-SHA
EXP1024-DES-CBC-SHA
NULL-MD5
NULL-SHA
1 ARC4 is compatible with RC4™ RSA Data Security.
2 ARC2 is compatible with RC2™ RSA Data Security.
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-142
Encryption
3DES (168)
DES (56)
DES (56)
2
ARC2 (40)
1
ARC4 (40)
DES (40)
2
ARC2 (40)
1
ARC4 (40)
1
ARC4 (40)
DES (56)
None
None
Availability: Serial, Telnet; FIPS Mode (serial only)
(This command must be entered on one line.) You can identify either individual
ciphers or use the fips, noexpor56, strong, weak, default, or all keywords to
specify cipher sets.
The no form of this command is used to remove a cipher or set of ciphers. You
must specify which algorithm(s) to remove following the no crypto command.
For example, using the commands crypto ARC4-MD5 and crypto ARC4-SHA
loads both schemes into the current user-defined security policy. Additionally,
you can alter the preset cryptography schemes specified for the current security
policy. If you enter crypto weak and no crypto NULL-MD5 commands, the
NULL-MD5 cryptography scheme is removed from the current security policy.
Message Key
Authentication Exchange
SHA1 RSA (1024)
MD5 RSA (1024)
SHA1 RSA (1024)
MD5 RSA (512)
MD5 RSA (512)
SHA1 RSA (512)
MD5 RSA (1024)
MD5 RSA (1024)
SHA1 RSA (1024)
SHA1 RSA (1024)
MD5 None
SHA1 None
Appendix C Command Summary
Security
Policy
Assignments
fips, strong, all
strong, all
fips, strong, all
weak, all
weak, default, all
weak, all
weak, default, all
weak, default, all
weak, default, all
weak, all
weak, default, all
weak, default, all
78-13124-05