Appendix - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

MiniMax Command Summary
MiniMax is a command line-based serial interface management system for SSL
devices. MiniMax is normally not visible to users, but is entered by device in
serious error states, such as when the device fails any FIPS self-test. In these
circumstances, MiniMax allows users to exit from the error condition as
gracefully as possible, returning the device to a usable status. The MiniMax state
can be identified by the presence of the MiniMax prompt (
prompt displayed when the device has failed any self-tests is
self-test failure>>.
This appendix contains the following sections:
•
•
•
•
78-13124-05
Text Conventions
Getting Help
Examples
Command Set
Cisco 11000 Series Secure Content Accelerator Configuration Guide
A P P E N D I X
D
) in the console. The
>>
D-1