Help; Httpheader - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
help
Syntax Description
Usage Guidelines
httpheader
Syntax Description
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-152
Displays help information for the specified command.
help [command]
command
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not specify a command, help information is displayed for all Server
Configuration Commands
Specifies the header information to pass to hardware servers.
httpheader <client-cert|client-custom <fieldname> <fieldvalue>|
pre-filter|prefix <prefixstring>|server-cert|session>
no httpheader <client-cert|client-custom|pre-filter|prefix|server-cert|
session>
client-cert
client-custom
fieldname
fieldvalue
server-cert
pre-filter
prefix
The name of the command.
Adds the client certificate to the HTTP stream.
Sets up custom client HTTP headers.
The name of the header field. This text must be entered
within quotes.
The value to put in the header field. This text must be
entered within quotes.
Adds the server certificate to the HTTP stream.
Pre-filters the client header.
Allows a prefix string to be added to the HTTP stream.
This text must be entered within quotes.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
