Sslv2 Enable; Sslv3 Enable - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
Usage Guidelines
Related Commands
sslv2 enable
Usage Guidelines
Related Commands
sslv3 enable
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-114
Availability: Serial, Telnet; FIPS Mode (serial only)
session-cache enable (Backend Server Configuration Mode)
session-cache size (Backend Server Configuration Mode)
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 2 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
sslv3 enable(Backend Server Configuration Command Set)
tlsv1 enable (Backend Server Configuration Command Set)
Enables SSL version 3 protocols.
sslv3 enable
no sslv3 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 3 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
