Example: Configuring Snmp; Figure 5-16 Snmp Configuration Example - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Chapter 5 Graphical User Interface Reference

Example: Configuring SNMP

78-13124-05
1. Click SNMP to activate the SNMP tabs. The Settings page opens
automatically, as shown in Figure 5-16.

Figure 5-16 SNMP Configuration Example

Type the default community, contact information, and location information in
2.
appropriate text boxes. Click Update after changing the value in each field
and selecting the Enabled check box.
3. Click the Traps tab. The Traps page opens, as shown in Figure 5-17.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
General Configuration Examples
5-19