To Set The Date And Time; To Change The Date And Time; All That Is Missing Now Is Your Name And Fax; Number - Olivetti Fax-Lab 115 Instructions Manual

T
O SET THE DATE AND TIME
The first time you connect the fax machine to the
power supply or whenever there is a power failure
you must set the date and time as described below.
Once set, the date and time can be changed at any time,
see the "To change the date and time" section.
1. Press the key:
The display shows:
2. Press the key:
The display shows:
3. If you want to select a different format from the one
displayed, press the keys:
| }
/
4. Press the key:
The display shows:
5. To select the other time format (12 hours), press the
keys:
| }
/ The display shows:
6. Press the key:
The display shows:
7. To enter the new date and time (e.g. 26-03-04; 12:00),
press the keys:
- As each digit is entered, the cursor will move to the next
one.
8. If you wish to move the cursor to digits to be modified,
press the keys:
| }
/
9. Then overwrite the digits with the correct ones, by press-
ing the keys:
-
10. To confirm the setting, press the key:
The date and time setting procedure has been com-
pleted. The new date and time will be updated auto-
matically and will be printed on each page sent.
11. To return the fax machine to its initial stand-by mode,
press the key:
Remember that the stand-by mode is the status in
which the fax machine is idle and that it is the mode from
which the machine can be programmed.
10
If you have chosen the 12-hour time format, the display will
show the letter "p" (post meridiem) or the letter "a" (ante
meridiem). To switch from one format to the other:
1. Position the cursor, using the
modified.
2. Press the key.
3. If you think you have made a mistake and want to abort the
procedure in progress, press the
T
O CHANGE THE DATE AND TIME
If the date and time shown on the display are not cor-
rect, you can change them at any time.
1. Press the key
until the display shows:
2. To confirm the setting, press the key:
The display shows:
From this point follow the procedure previously de-
scribed in "To set the date and time".
A
LL THAT IS MISSING NOW IS YOUR NAME AND FAX

NUMBER

Once set, the name (max. 16 characters) and number
(max. 20 digits) will remain unchanged until they are
intentionally changed and will be printed on each page
received by your correspondent's fax machine.
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key
until the display shows:
4. Press the key:
The display shows:
5. To select the characters of each key cyclically, press
the keys:
-
6. To leave a space, press the keys:
| }
/
7. To include a variety of special symbols, e.g. &, in your
name, press the keys:
-
| }
/ keys, below the letter to be
key.