Table of Contents
Advertisement
Avaya, Inc.
Payload
CPE Signal
GWY Signal
D. Display Debug State/Flags
Displays the following information about the active
debug state and flags:
Debugging – ENABLED or DISABLED.
Flags:
C. Control Debug (Enable/Disable)
Enables and disables debugging.
S. Set Debug Flags
Sets values for the following debug flags:
Globals (DT/PCHES)
T10 & T11 Timeouts
WAN Signaling
WAN Input Ready
POTS Input Ready
POTS Hook State
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
Your settings display in the D. Display Debug
State/Flags command.
Select your choice.
- 81 - PARTNER ACS 1600 DSL module User Guide
o Globals (DT/PCHES)
o T10 & T11 Timeouts
o WAN Signaling
o WAN Input Ready
o POTS Input Ready
o POTS Hook State
Advertisement
Table of Contents
