Avaya PARTNER 1600 DSL MODULE User Manual page 38

Avaya, Inc.
Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.
ENTER.
C. Copy filter operations menu
Displays the IP Filter Copy to Buffer Menu, which
contains the following commands for all filters of the
type that you set with the Toggle input or output type
filters to view/edit command.
C. Copy a filter of the chosen type to the
buffer
Copies the filter that you select to the buffer.
Type the number of the filter to copy, and then
press enter.
D. Display the filter in the copy buffer
Displays the following information about the filter
in the copy buffer:
num – number of the filter
state – Idle or Active
action – Pass or Discard
srcLwP - Filter Source Port Low – TCP
or UDP packets only
srcHiP - Filter Source Port High - TCP or
UDP packets only
source.ip.addr.low
IP Low Address
source.ip.addr.high - Filter Source IP
High Address
proto - Filter protocol – IP, ICMP, IGMP,
TCP, UDP
mask – ICMP or TCP only
dstLwP - Filter Destination Port Low
dstHiP - Filter Destination Port High
dest.ip.addr.low - Filter Destination IP
Low Address
dest.ip.addr.high - Filter Destination IP
High Address
- 37 - PARTNER ACS 1600 DSL module User Guide
To accept this value, press
- Filter Destination