Avaya PARTNER 1600 DSL MODULE User Manual page 50

Avaya, Inc.
2. Configure Receive CIR
Follow the on-screen messages to enter the
following information. Questions below may or
not display, depending on the options that you
select.
Receive Committed Information Rate
(CIR)
Committed burst size (Bc)
Circuit Throughput
Excess burst size (Be)
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
3. Configure FRF.12 Fragmentation
Displays the
Configuration submenu, which contains the
following commands.
1. Enable/Disable End-to-End FRF.12
Enables
FRF.12.
2. Set Fragmentation Size
Sets the maximum fragmentation size, a
value between 100-1,600 bytes.
Type the fragmentation size, and then
press ENTER.
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
Select your choice.
- 49 - PARTNER ACS 1600 DSL module User Guide
End-to-End Fragmentation
and disables End-to-End