Avaya PARTNER 1600 DSL MODULE User Manual page 48

Avaya, Inc.
SDSL Mode
Displays SDSL Configuration submenu, which contains the
following commands to set the SDSL mode or speed.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
1. Toggle SDSL Mode (CO or CPE)
2. Set SDSL Speed to Auto Cycle (Nokia)
Displays the Auto Cycle First Speed Option
submenu, which contains the following commands to
set the initial speed.
1. 1536 Kbps
2. 1152 Kbps
3. 768 Kbps
4. 384 Kbps
5. 192 Kbps
Select your choice.
3. Set SDSL Speed to Auto Sense (Copper
Mountain)
4. Enable/Disable Conexant AutoBaud Mode
Enables and disables the Conexant AutoBaud rate
adaptation mode.
5. Set SDSL Sync Delay (Lucent)
Sets the SDSL sync delay.
messages to disable AutoBaud.
AutoBaud to set the SDSL sync delay.
6. Set SDSL to AccessLan CPE Mode
7. Set SDSL Speed Manually
Sets the SDSL speed, a value between 144-2,320
Kbps. Type the SDSL data rate value, and then press
ENTER.
8. Restart SDSL Activation Sequence
9. SDSL Interface Mode (Bit Order)
A. Enable/Disable
Messages
Enables and disables the display of SDSL AutoBaud
debugging messages.
second time to disable.
- 47 - PARTNER ACS 1600 DSL module User Guide
Follow the on-screen
You must disable
SDSL AutoBaud
Select to enable.
Debug
Select a