1. Manuals
  2. Brands
  3. Avaya Manuals
  4. Telephone Accessories
  5. PARTNER 1600 DSL MODULE
  6. User manual

Avaya PARTNER 1600 DSL MODULE User Manual

Advanced communications system module
Hide thumbs Also See for PARTNER 1600 DSL MODULE:
Table of Contents

Advertisement

Quick Links

Download this manual
PARTNER
Advanced Communications System
1600 DSL Module User Guide
Issue 1
May 2001

Advertisement

Table of Contents
loading

Related Manuals for Avaya PARTNER 1600 DSL MODULE

Summary of Contents for Avaya PARTNER 1600 DSL MODULE

  • Page 1 PARTNER Advanced Communications System 1600 DSL Module User Guide Issue 1 May 2001...

  • Page 2: Table Of Contents

    Auto Log off................21 Exiting ................... 21 Verifying an IP address ............21 A computer running Windows 95/98/Me/2000 ....21 The PARTNER ACS 1600 DSL module ......22 Avaya, Inc. - i - PARTNER ACS 1600 DSL module User Guide...
  • Page 3 3. Configure Bridge ............... 40 G. Enable/Disable Bridging Globally........ 41 P. Enable/Disable Bridging by Port........41 A. Configure Bridge Aging Timer ........41 T. Enable/Disable Spanning Tree Globally ...... 41 Avaya, Inc. - ii - PARTNER ACS 1600 DSL module User Guide...
  • Page 4 1. Change User ID ............59 2. Change User Password ..........59 3. Change NetMan Password .......... 59 9. System Utilities..............60 P. Ping Utility ..............60 T. Trace Route..............60 Avaya, Inc. - iii - PARTNER ACS 1600 DSL module User Guide...
  • Page 5 U. Configure NAT UDP Timeout ........70 R. Configure NAT Port Range ......... 70 N. Configure NAT Local Server Entry ......71 S. Display NAT Statistics ..........71 Avaya, Inc. - iv - PARTNER ACS 1600 DSL module User Guide...
  • Page 6 79 D. Debug MGCP/NCS ............. 79 R. Remove a connection ..........79 E. CopperCom Call Control........... 80 S. Statistics ..............80 Configure..............80 D. Debug Control ............. 80 Avaya, Inc. - v - PARTNER ACS 1600 DSL module User Guide...
  • Page 7 Configuring the SNMP Trap Host IP Address ....93 Upgrading the system ............93 Configuring the TFTP Server ........... 94 Using TFTP..............94 Using Telnet..............96 Verifying the download ............ 96 Avaya, Inc. - vi - PARTNER ACS 1600 DSL module User Guide...
  • Page 8 Adding a DLCI ............... 116 Modifying a DLCI ............118 Deleting a DLCI ............. 119 Configuring Frame Relay options........120 Configuring fragmentation ..........120 Configuring the maintenance protocol ......122 Avaya, Inc. - vii - PARTNER ACS 1600 DSL module User Guide...
  • Page 9 ..........144 Setting the bridge aging timer ........145 Disabling RIP poisoned reverse .......... 146 Disabling RIP poisoned reverse globally ....... 146 Disabling RIP poisoned reverse by port......147 Avaya, Inc. - viii - PARTNER ACS 1600 DSL module User Guide...
  • Page 10 Configuring the DHCP address range pool ......163 11. Verification ..............165 Power-up test ..............165 Operational test..............165 Maintenance ............... 166 Displaying the current configuration ........167 A. Menu hierarchy............168 Avaya, Inc. - ix - PARTNER ACS 1600 DSL module User Guide...
  • Page 11 B. PARTNER ACS 1600 DSL module specifications ..186 C. Connector pinouts ............188 D. USI Cables ..............190 DTE or DCE? ..............190 Which Hardware Protocol? ..........190 E. IP Filtering ..............193 Glossary ................194 Index ..................199 Avaya, Inc. - x - PARTNER ACS 1600 DSL module User Guide...

  • Page 12: Introduction

    Simple Network Management Protocol (SNMP) and upgrade ACOS. Chapter 5, “WAN configuration”, details how to configure the PARTNER ACS 1600 DSL module for voice and data operation. Avaya, Inc. - 11 - PARTNER ACS 1600 DSL module User Guide...
  • Page 13 Appendix C, “Connector pinouts”, provides interface pinout information. Appendix D, “USI cables”, provides information about the various USI cables. Appendix E, "IP Filtering", provides information about the IP filtering process. Avaya, Inc. - 12 - PARTNER ACS 1600 DSL module User Guide...

  • Page 14: Partner Acs 1600 Dsl Module Basics

    DSL-SDSL (Symmetrical Digital Subscriber Line) that supplies voice lines and data connection for the PARTNER ACS System LAN - 10/100BaseT Ethernet Console Port (DB9 Connector [RS232 Serial Interface]) USI - V.35 Interface Avaya, Inc. - 13 - PARTNER ACS 1600 DSL module User Guide...

  • Page 15: Front View

    Front View V.35 Console Ethernet DSL Line PARTNER Power LED Avaya, Inc. - 14 - PARTNER ACS 1600 DSL module User Guide...

  • Page 16: Connecting

    There are two ways that you can log on to the PARTNER ACS 1600 DSL module: A terminal emulation program through the console port. A Telnet program through the Ethernet port. Avaya, Inc. - 15 - PARTNER ACS 1600 DSL module User Guide...

  • Page 17: Using A Terminal Emulation Program

    6. Type your password, and the press ENTER. The Main Menu displays. ***************************************** Main Menu ***************************************** 1. Reports Menu 2. Configure IP Router 3. Configure Bridge 5. Configure WAN 6. Configure LAN 7. Configure SNMP Avaya, Inc. - 16 - PARTNER ACS 1600 DSL module User Guide...

  • Page 18: Using A Telnet Program

    P. Configure RIP Poisoned Reverse by Port N. Configure DNS Client H. Configure DHCP Client L. Configure DHCP Relay T. Configure Telnet Server Port F. Configure IP Filtering D. Display Route Table Avaya, Inc. - 17 - PARTNER ACS 1600 DSL module User Guide...
  • Page 19 For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. You can now run the Telnet program. Avaya, Inc. - 18 - PARTNER ACS 1600 DSL module User Guide...
  • Page 20 Z. Diagnostics Menu C. Command Line Interface P. VoicePath Configure For more information on the menus, submenus and commands on the Main Menu, see the “Menu interface” chapter. Avaya, Inc. - 19 - PARTNER ACS 1600 DSL module User Guide...

  • Page 21: Menu Interface

    Ethernet port, you must restart the PARTNER ACS 1600 DSL module for the new settings to take effect. For more information, see the “Logging on” section earlier in this chapter. Avaya, Inc. - 20 - PARTNER ACS 1600 DSL module User Guide...

  • Page 22: Auto Log Off

    4. Click the IP Address tab, and note the IP address that displays. You can also run the winipcfg command at the command prompt to verify the IP address of your computer. Avaya, Inc. - 21 - PARTNER ACS 1600 DSL module User Guide...

  • Page 23: The Partner Acs 1600 Dsl Module

    S. Display Bridge Status P. Display PPP Authorization Entries U. Display System Uptime 2. Select Display Current Configuration. 3. Note the IP addresses for the Ethernet and SDSL Interface. Avaya, Inc. - 22 - PARTNER ACS 1600 DSL module User Guide...

  • Page 24: Menu Interface

    Z. Diagnostics Menu C. Command Line Interface P. VoicePath Configure M. Manage MGCP/NCS Embedded Client E. CopperCom Call Control E. Call Control Settings U. Configure Tollbridge Voice Client Avaya, Inc. - 23 - PARTNER ACS 1600 DSL module User Guide...

  • Page 25: Reports Menu

    SNMP System Location - user-defined (maximum = 39 alphanumeric characters). SNMP Community - name must match the SNMP host (maximum = 39 alphanumeric characters); If SNMP is Avaya, Inc. - 24 - PARTNER ACS 1600 DSL module User Guide...
  • Page 26 VPI/VCI – RAW (AAL5), RAW (AAL0), Proprietary Voice, RFC 1483 (using VC Muxing), RFC 1483 (with LLC Encapsulation), RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364 (PPPoATM using VC Muxing). Avaya, Inc. - 25 - PARTNER ACS 1600 DSL module User Guide...

  • Page 27: Display Network Statistics

    A. Display ARP Statistics I. Display Interface Statistics B. Display Bridge Statistics** D. Display DLCI Statistics A. Display ATM PVC Statistics Z. Clear ATM PVC Statistics Avaya, Inc. - 26 - PARTNER ACS 1600 DSL module User Guide...

  • Page 28: Display Media Statistics

    Select your choice. 1. Display ATM Statistics Z. Clear ATM Statistics 1. Display ENET Statistics Z. Clear ENET Statistics 1. Display POTS Statistics Z. Clear POTS Statistics Select your choice. Avaya, Inc. - 27 - PARTNER ACS 1600 DSL module User Guide...

  • Page 29: Display Route Table

    “PARTNER ACS 1600 DSL module basics” chapter. For more information on the maximum aging time value, see "Configure bridge" later in this chapter. Avaya, Inc. - 28 - PARTNER ACS 1600 DSL module User Guide...

  • Page 30: Display Bridge Status

    Slot #/Interface #/Port # - active slot for the PPP interface. Userid/Password/Peer Name – values for the PPP interface. U. Display System Uptime Displays the amount of time elapsed during the active session. Avaya, Inc. - 29 - PARTNER ACS 1600 DSL module User Guide...

  • Page 31: Configure Ip Router

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information, see the “PARTNER ACS 1600 DSL module basics” chapter. Avaya, Inc. - 30 - PARTNER ACS 1600 DSL module User Guide...

  • Page 32: Configure Port Ip Address

    F. Add/Change Default Route Creates or changes the default static route, and then adds it to the Route Table. Type the Gateway address for the default route, and then press ENTER. Avaya, Inc. - 31 - PARTNER ACS 1600 DSL module User Guide...

  • Page 33: Enable/Disable Rip

    P. Configure RIP Poisoned Reverse by Port Enables and disables RIP Poisoned Reverse for the selected interface. Type the number of the Interface, and then enable or disable. Avaya, Inc. - 32 - PARTNER ACS 1600 DSL module User Guide...

  • Page 34: Configure Dns Client

    Server IP address, and then press ENTER. The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 33 - PARTNER ACS 1600 DSL module User Guide...

  • Page 35: Configure Telnet Server Port

    You must globally enable the filters for the associated filtering to work. Follow the on-screen instructions to enable or disable both the input and output filters globally. Avaya, Inc. - 34 - PARTNER ACS 1600 DSL module User Guide...
  • Page 36 Filter Destination Port High The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 35 - PARTNER ACS 1600 DSL module User Guide...
  • Page 37 Filter Source Port Low – TCP or UDP packets only Filter Source Port High - TCP or UDP packets only Filter Destination IP Low Address Filter Destination IP High Address Filter Destination Port Low Avaya, Inc. - 36 - PARTNER ACS 1600 DSL module User Guide...
  • Page 38 – ICMP or TCP only dstLwP - Filter Destination Port Low dstHiP - Filter Destination Port High dest.ip.addr.low - Filter Destination IP Low Address dest.ip.addr.high - Filter Destination IP High Address Avaya, Inc. - 37 - PARTNER ACS 1600 DSL module User Guide...
  • Page 39 S. Show IP filtering statistics Displays the total number of input and output data packets filtered. Y. Clear IP filtering statistics Deletes all data from the Show IP filtering statistics command. Avaya, Inc. - 38 - PARTNER ACS 1600 DSL module User Guide...

  • Page 40: Display Route Table

    GATEWAY ADDRESS - IP address of packets sent to destination. interface - IP address of outgoing interface. Metric - number of hops (routers) required to reach the specified gateway. Type – static or dynamic. Avaya, Inc. - 39 - PARTNER ACS 1600 DSL module User Guide...

  • Page 41: Configure Bridge

    Enable bridging globally Enable spanning Using spanning tree by port tree? Enable spanning Assigning tree globally bridge priority? Define bridge priority Assigning root Define root bridge bridge? Avaya, Inc. - 40 - PARTNER ACS 1600 DSL module User Guide...

  • Page 42: Enable/Disable Bridging Globally

    ENTER. The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 41 - PARTNER ACS 1600 DSL module User Guide...

  • Page 43: Configure Spanning Tree Port Priority

    Sets the Spanning Tree path cost, a value between 1- 65,535 (default = 32,768). Type the number of the Interface to configure, type the path cost value, and then press ENTER. Avaya, Inc. - 42 - PARTNER ACS 1600 DSL module User Guide...

  • Page 44: Delete Bridge Forwarding Database Entry

    D. Delete Bridge Forwarding Database Entry Deletes an Ethernet address from the bridge forwarding database. Type the Ethernet address to delete, and then press ENTER. Avaya, Inc. - 43 - PARTNER ACS 1600 DSL module User Guide...

  • Page 45: Configure Wan

    Select quick ATM? Define PVCs configuration Configure ATM ATM? Frame Relay? options Define PVCs Frame Relay? Define DLCIs Set maintenance Configure ATM protocol Define DLCIs options Set maintenance protocol Avaya, Inc. - 44 - PARTNER ACS 1600 DSL module User Guide...

  • Page 46: Quick Configuration

    Select your choice. The IAD automatically restarts. Your settings display in the Display Current Configuration command in the Reports Menu. For more information, see "Reports Menu" earlier in this chapter. Avaya, Inc. - 45 - PARTNER ACS 1600 DSL module User Guide...

  • Page 47: Configure Physical Interface

    3. 2.083 MBps 4. 1.562 MBps 5. 520 KBps 6. 112 KBps Select your choice. 3. Use Internal Receive Clock 4. Use External Receive Clock Select your choice. Avaya, Inc. - 46 - PARTNER ACS 1600 DSL module User Guide...
  • Page 48 9. SDSL Interface Mode (Bit Order) Enable/Disable SDSL AutoBaud Debug Messages Enables and disables the display of SDSL AutoBaud debugging messages. Select to enable. Select a second time to disable. Avaya, Inc. - 47 - PARTNER ACS 1600 DSL module User Guide...

  • Page 49: Configure Dlcis (Frame Relay)

    Excess burst size (Be) The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 48 - PARTNER ACS 1600 DSL module User Guide...
  • Page 50 The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Select your choice. Avaya, Inc. - 49 - PARTNER ACS 1600 DSL module User Guide...
  • Page 51 Excess burst size (Be) The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 50 - PARTNER ACS 1600 DSL module User Guide...

  • Page 52: Configure Pvcs (Atm)

    1. CBR 2. UBR Select your choice, and then follow the on-screen messages to set the Peak Cell Rate (PCR) value. Avaya, Inc. - 51 - PARTNER ACS 1600 DSL module User Guide...
  • Page 53 3. CHAP Client 4. CHAP Server Select your choice, and then follow the on-screen messages to enter the following: New PPP Userid New PPP Password New CHAP Peer Name Avaya, Inc. - 52 - PARTNER ACS 1600 DSL module User Guide...
  • Page 54 1. CBR 2. UBR Select your choice, and then follow the on-screen messages to set the PCR value. Avaya, Inc. - 53 - PARTNER ACS 1600 DSL module User Guide...
  • Page 55 3. CHAP Client 4. CHAP Server Select your choice, and then follow the on-screen messages to enter the following: New PPP Userid New PPP Password New CHAP Peer Name Avaya, Inc. - 54 - PARTNER ACS 1600 DSL module User Guide...

  • Page 56: Configure Fr Options (Frame Relay)

    2. Enable Automatic Fragment Sizing 3. Set Manual Fragment Size Sets the maximum fragment size, a value between 0-50 ms or 100-1600 bytes. Type the fragment size, and then press ENTER. Avaya, Inc. - 55 - PARTNER ACS 1600 DSL module User Guide...
  • Page 57 1. Configure Transmit Congestion Parameters Follow the on-screen messages to enter the following transmit congestion parameter information. FECN/BECN condition set size FECN/BECN condition clear size FECN/BECN maximum number of bytes to store Avaya, Inc. - 56 - PARTNER ACS 1600 DSL module User Guide...

  • Page 58: Configure Atm Options (Atm)

    Sends an OAM Loopback cell on the port that you select. 6. Configure EmptyCells Configures any empty cells. Type 1 to configure idle cells or 2 to configure unassigned cells. Avaya, Inc. - 57 - PARTNER ACS 1600 DSL module User Guide...

  • Page 59: Configure Lan

    ENTER. L. Configure System Location Sets the location of the SNMP host server (maximum = 39 alphanumeric characters). Type the new location information, and then press ENTER. Avaya, Inc. - 58 - PARTNER ACS 1600 DSL module User Guide...

  • Page 60: Configure Snmp Community

    (maximum 17 alphanumeric characters), and then press ENTER. Retype the User password, and then press ENTER. For more information on changing the User ID or password, see the "Administration" chapter. Avaya, Inc. - 59 - PARTNER ACS 1600 DSL module User Guide...

  • Page 61: System Utilities

    The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press ENTER. Avaya, Inc. - 60 - PARTNER ACS 1600 DSL module User Guide...

  • Page 62: Configure Console Baud Rate

    C. Copy file Copies and saves the entered file under a new file name. Type the name of the file to copy, and then type the new file name. Avaya, Inc. - 61 - PARTNER ACS 1600 DSL module User Guide...

  • Page 63: File Transfer Menu

    2. Receive via XMODEM Select your choice. Type the IP address of the computer that has a TFTP server, and then type the name of the file to download. Avaya, Inc. - 62 - PARTNER ACS 1600 DSL module User Guide...

  • Page 64: Interworking Connections

    Type the number of the NIM with the datalink protocol = Frame Relay. Select the port to use. Type the number of the NIM with the datalink protocol = ATM. Select the port to use. Avaya, Inc. - 63 - PARTNER ACS 1600 DSL module User Guide...
  • Page 65 Displays the FRF.8 FECN Mapping menu, which contains the following commands to set the FECN mapping value: 0. Always 0 1. Always 1 M. Map FR FECN to ATM EFCI Avaya, Inc. - 64 - PARTNER ACS 1600 DSL module User Guide...

  • Page 66: Delete Interworking Connection

    ID - ID number for the interface. Type - FRF.5 or FRF.8. FR Slot - frame relay for this ID. DLCI - the frame relay datalink connection identifier. Avaya, Inc. - 65 - PARTNER ACS 1600 DSL module User Guide...

  • Page 67: Default Interworking Connections

    Type the number of the Interface, the number of the port, the following information, and then press ENTER: Gateway IP address DNS Server IP address NetBIOS Server IP address Subnet Mask Domain Name DHCP Lease Time Avaya, Inc. - 66 - PARTNER ACS 1600 DSL module User Guide...

  • Page 68: Configure Dhcp Address Range Pool

    DHCP Client MAC address (enter value without colons) Host Name Lease Time IP Address Subnet Mask Default Gateway DNS Server Your settings display in the Display DHCP Entry Details command. Avaya, Inc. - 67 - PARTNER ACS 1600 DSL module User Guide...

  • Page 69: Display Dhcp Configuration

    Default lease - length of time to keep the Internet connection active. Domain name - defines the entity that owns the IP address. For example, avaya.com. Low address - minimum IP address to assign. High address - maximum IP address to assign.

  • Page 70: Display Dhcp Server Assigned Addresses

    PARTNER ACS 1600 DSL module. X. Delete a DHCP Client Entry Deletes a Client entry from the Display DHCP Configuration command. Type the Client number to delete, and then press ENTER. Avaya, Inc. - 69 - PARTNER ACS 1600 DSL module User Guide...

  • Page 71: Delete A Dhcp Assignment Entry

    5,000-65,534 (default = 50,000) and a high range between 50,000-65,535 (default = 65,535). The size of the NAT port range defines the number of simultaneous connections permitted. a small port range limits Avaya, Inc. - 70 - PARTNER ACS 1600 DSL module User Guide...

  • Page 72: Configure Nat Local Server Entry

    Errors - the number of cksum, retries and bad packets. Total IP packets - number of IP packets received and sent. Reserved addresses - number of reserved IP addresses. Avaya, Inc. - 71 - PARTNER ACS 1600 DSL module User Guide...

  • Page 73: Display Nat Connection Table

    X. Delete IP Address from NAT Tables Deletes an IP address entry from the Display NAT Statistics, Display Connection Table Display Connection Details commands. Type the IP address to delete, and then press ENTER. Avaya, Inc. - 72 - PARTNER ACS 1600 DSL module User Guide...

  • Page 74: Delete Nat Local Server Entry

    Debug Messages Displays the Derived Timing Debug submenu, which contains the following commands to enable/disable only PSTN derived timing debugging messages. 1. Enable 2. Disable Select your choice. Avaya, Inc. - 73 - PARTNER ACS 1600 DSL module User Guide...

  • Page 75: Diagnostics Menu

    1. +3 level 2. +1 level 3. -1 level 4. -3 level Select your choice. 2. Continuous 2-level transmission 4. Continuous 4-level transmission L. Digital Far Loopback Select your choice. Avaya, Inc. - 74 - PARTNER ACS 1600 DSL module User Guide...

  • Page 76: Command Line Interface

    If you do not enter any optional parameters, it finds the first available slot, interface and port. set wan framerelay dlci <dlci number> <1490 or 1483> (slot) (interface) (port) – sets the Frame Relay Avaya, Inc. - 75 - PARTNER ACS 1600 DSL module User Guide...

  • Page 77: Voicepath Configure

    Inter-arrival jitter is the difference in relative transit time for two packets. It is the difference between the packet's RTP time-stamp and the receiver's clock at the time of arrival of the packet. Avaya, Inc. - 76 - PARTNER ACS 1600 DSL module User Guide...

  • Page 78: Display Jitter Delay

    Select your choice. If you are not sure which mode to use, check with your telephone service provider. Normally, u-Law is used in North America and a-Law in Europe. Avaya, Inc. - 77 - PARTNER ACS 1600 DSL module User Guide...

  • Page 79: Set Debug Mode

    3. Configure Echo Cancellation default setting per port Enables and disables Echo Cancellation by port. Type the line number, press ENTER, and then enable or disable. Select your choice. Avaya, Inc. - 78 - PARTNER ACS 1600 DSL module User Guide...

  • Page 80: Manage Mgcp/Ncs Embedded Client

    2. Enable Informational msgs 3. Enable Verbose msgs Select your choice. R. Remove a connection Removes LOST connections. Type the number of the Connection ID to delete, and then press ENTER. Avaya, Inc. - 79 - PARTNER ACS 1600 DSL module User Guide...

  • Page 81: Coppercom Call Control

    Displays the CopperCom Debug Control submenu, which contains the following commands. L. Display Line Status Displays the following information about the active line(s): Line State SLIC State Hook State Avaya, Inc. - 80 - PARTNER ACS 1600 DSL module User Guide...
  • Page 82 To accept this value, press ENTER. Your settings display in the D. Display Debug State/Flags command. Select your choice. Avaya, Inc. - 81 - PARTNER ACS 1600 DSL module User Guide...

  • Page 83: Call Control Settings

    Port to enable. Number of seconds for port to stay on hook. Number of seconds for port to stay off hook. Your settings display in the Display parameters command. Avaya, Inc. - 82 - PARTNER ACS 1600 DSL module User Guide...

  • Page 84: Display Iad State

    Your settings display in the Display Trace data command. D. Display Trace data Displays the following Trace data: L2 Module Cc Module Mg Module L2 Subscriber Cc Subscriber Avaya, Inc. - 83 - PARTNER ACS 1600 DSL module User Guide...

  • Page 85: Pick Sound Heard If Insufficient Wan B/W To Complete Call

    Client IP address Gateway IP address Priority Voice DLCI (Frame Relay only) Debug message flags (OFF or ON) o Status/keep-alive messages o Provisioning messages o State-transition messages Avaya, Inc. - 84 - PARTNER ACS 1600 DSL module User Guide...

  • Page 86: Debugging Options

    Tollbridge debugging messages: 0. Enable/Disable all messages 1. Enable/Disable status/keep-alive messages 2. Enable/Disable provisioning messages 3. Enable/Disable state-transition messages 4. Unhide/Hide voice client IP Interface Select your choice. Avaya, Inc. - 85 - PARTNER ACS 1600 DSL module User Guide...

  • Page 87: Administration

    Menus, submenus, and commands that display on the Main Menu depend on access level that you use to log on. For example, access level User displays the fewest number of options. Avaya, Inc. - 86 - PARTNER ACS 1600 DSL module User Guide...

  • Page 88: Changing The User Id

    The following table lists the privileges for each level: Access level Menu access level User User Network Administrator NetMan and User Avaya, Inc. - 87 - PARTNER ACS 1600 DSL module User Guide...

  • Page 89: Configuring Snmp

    Configure System Contact Configure System Name Configure System Location Configure SNMP Community Configure SNMP Trap Host IP Address For more information on the SNMP options, see the “Main Menu” chapter. Avaya, Inc. - 88 - PARTNER ACS 1600 DSL module User Guide...

  • Page 90: Enabling/Disabling Snmp

    SNMP Configuration Menu ***************************************** E. Enable/Disable SNMP P. Configure System Contact N. Configure System Name L. Configure System Location C. Configure SNMP Community T. Configure SNMP Trap Host IP Address Avaya, Inc. - 89 - PARTNER ACS 1600 DSL module User Guide...

  • Page 91: Configuring The System Name

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 90 - PARTNER ACS 1600 DSL module User Guide...

  • Page 92: Configuring The System Location

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 91 - PARTNER ACS 1600 DSL module User Guide...

  • Page 93: Configuring The System Community

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 92 - PARTNER ACS 1600 DSL module User Guide...

  • Page 94: Configuring The Snmp Trap Host Ip Address

    TFTP Server program, a program that you must purchase separately. Before you can run TFTP, you must configure the IP address of the Ethernet or SDSL Interfaces. For more information, see the "Getting Started" chapter. Avaya, Inc. - 93 - PARTNER ACS 1600 DSL module User Guide...

  • Page 95: Configuring The Tftp Server

    7. Configure SNMP 8. Configure Login 9. System Utilities D. Configure DHCP Server N. Configure NAT T. Derived Timing Z. Diagnostics Menu C. Command Line Interface P. VoicePath Configure Avaya, Inc. - 94 - PARTNER ACS 1600 DSL module User Guide...
  • Page 96 6. Type the IP address of the TFTP Server, and then press ENTER. You can also upgrade the PARTNER ACS 1600 DSL module software using TFTP via Telnet. Avaya, Inc. - 95 - PARTNER ACS 1600 DSL module User Guide...

  • Page 97: Using Telnet

    ***************************************** D. Directory of all files C. Copy file R. Rename File X. Remove File by name F. Format File System drive S. Space left in File System Avaya, Inc. - 96 - PARTNER ACS 1600 DSL module User Guide...

  • Page 98: Upgrading Acos

    1. Reports Menu 2. Configure IP Router 3. Configure Bridge 5. Configure WAN 6. Configure LAN 7. Configure SNMP 8. Configure Login 9. System Utilities D. Configure DHCP Server Avaya, Inc. - 97 - PARTNER ACS 1600 DSL module User Guide...
  • Page 99 3. Select File Transfer Menu. The File Transfer Menu displays. ****************************************** File Transfer Menu ****************************************** B. Load Boot ROM O. Update ACOS [acos.bin] X. Update Entire System A. File Transfer Utilities Avaya, Inc. - 98 - PARTNER ACS 1600 DSL module User Guide...

  • Page 100: Using Telnet

    1. On the Main Menu, select System Utilities. The Utilities Menu displays. ******************************************* Utilities Menu ******************************************* P. Ping Utility T. Trace Route Z. Configure Console Baud Rate V. Configure Console Timeout Avaya, Inc. - 99 - PARTNER ACS 1600 DSL module User Guide...

  • Page 101: Support

    3. Select Directory of all files. A list of all installed files displays. Support For Technical Support, contact you local Authorized Dealer or call the Avaya Help Line at 800 628 2888. Consultation charges may apply. Avaya, Inc. - 100 - PARTNER ACS 1600 DSL module User Guide...

  • Page 102: Wan Configuration

    1. On the Main Menu, select Configure WAN. The WAN Configuration Menu displays. ***************************************** WAN Configuration Menu ***************************************** 1. Configure Datalink Protocol 2. Configure Physical Interface 3. Configure DLCIs 4. Configure FR Options Avaya, Inc. - 101 - PARTNER ACS 1600 DSL module User Guide...

  • Page 103: Configuring The Physical Interface

    PARTNER ACS 1600 DSL module, see the “Getting started” chapter. You can now configure the physical interface. Configuring the Physical Interface The following are the WAN interfaces that you can configure: SDSL Avaya, Inc. - 102 - PARTNER ACS 1600 DSL module User Guide...

  • Page 104: Configuring The Sdsl Interface

    2. Set SDSL Speed to Auto Cycle (Nokia) 3. Set SDSL Speed to Auto Sense (Copper Mountain) 4. Enable/Disable Conexant AutoBaud Mode 5. Set SDSL Sync Delay (Lucent) Avaya, Inc. - 103 - PARTNER ACS 1600 DSL module User Guide...

  • Page 105: Configuring The Usi Interface

    2. Type 3. The WAN Configuration Menu displays. ***************************************** WAN Configuration Menu ***************************************** Configuring Universal Serial 1. Configure Datalink Protocol 2. Configure Physical Interface ESC to return to previous menu Avaya, Inc. - 104 - PARTNER ACS 1600 DSL module User Guide...
  • Page 106 5. Select Configure Physical Interface. The USI Configuration submenu displays. ***************************************** USI Configuration ***************************************** 1. Set WAN interface type 2. Configure Data Rate and Clocking Options ESC to return to previous menu Avaya, Inc. - 105 - PARTNER ACS 1600 DSL module User Guide...
  • Page 107 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 106 - PARTNER ACS 1600 DSL module User Guide...

  • Page 108: Quick Configuration

    2. Type 1. The WAN Configuration Menu displays. ***************************************** WAN Configuration Menu ***************************************** Configuring SDSL 0. Quick Configuration 1. Configure Datalink Protocol 2. Configure Physical Interface Avaya, Inc. - 107 - PARTNER ACS 1600 DSL module User Guide...

  • Page 109: Configuring Atm Pvcs

    ATM (PVCs) or Frame Relay (DLCIs). Configuring ATM PVCs The PARTNER ACS 1600 DSL module contains commands that allow you to configure ATM PVCs: Add New PVC Modify Existing PVC Avaya, Inc. - 108 - PARTNER ACS 1600 DSL module User Guide...

  • Page 110: Adding A Pvc

    3. Proprietary Voice 4. RFC 1483 (using VC Muxing) 5. RFC 1483 (with LLC Encapsulation) 6. RFC 2364 (PPPoATM with LLC Encapsulation) 7. RFC 2364 (PPPoATM using VC Muxing) Avaya, Inc. - 109 - PARTNER ACS 1600 DSL module User Guide...

  • Page 111: Modifying A Pvc

    3. Select Modify Existing PVC. 4. Type the port number to modify, and then press ENTER. 5. Type a VPI between 0-255 (default = 0), and then press ENTER. Avaya, Inc. - 110 - PARTNER ACS 1600 DSL module User Guide...
  • Page 112 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 111 - PARTNER ACS 1600 DSL module User Guide...

  • Page 113: Deleting A Pvc

    The PARTNER ACS 1600 DSL module contains commands that allow you to configure or display the following ATM options: Payload Scrambling F4 OAM VPI F4 OAM Type F4 OAM Configuration OAM Loopback Empty Cells Avaya, Inc. - 112 - PARTNER ACS 1600 DSL module User Guide...

  • Page 114: Configuring Payload Scrambling

    1. On the Main Menu, select Configure WAN, and then type the slot number of the WAN interface that you want to configure. The WAN Configuration Menu displays. Avaya, Inc. - 113 - PARTNER ACS 1600 DSL module User Guide...

  • Page 115: Sending Oam Loopback

    1. On the Main Menu, select Configure WAN, and then type the slot number of the WAN interface that you want to configure. The WAN Configuration Menu displays. Avaya, Inc. - 114 - PARTNER ACS 1600 DSL module User Guide...

  • Page 116: Configuring Empty Cells

    3. Configure F4 OAM Type 4. Display F4 OAM Configuration 5. Send OAM Loopback 6. Configure EmptyCells 3. Select Configure EmptyCells. The following instructions display on-screen: Empty Cells are currently IDLE Avaya, Inc. - 115 - PARTNER ACS 1600 DSL module User Guide...

  • Page 117: Configuring Frame Relay Dlcis

    The FR DLCI Config Menu displays. ***************************************** FR DLCI Config Menu ***************************************** 1. Add New DLCI 2. Modify Existing DLCI 3. Delete DLCI 4. Show Current DLCIs 3. Select Add New DLCI. Avaya, Inc. - 116 - PARTNER ACS 1600 DSL module User Guide...
  • Page 118 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 117 - PARTNER ACS 1600 DSL module User Guide...

  • Page 119: Modifying A Dlci

    The FR Encapsulation Configuration submenu displays. ***************************************** FR Encapsulation Configuration ***************************************** Current Encapsulation : None 1. RAW (No Encapsulation) 2. Proprietary Voice DLCI 3. RFC 1490 4. ATM RFC 1483 (Tunneling) Avaya, Inc. - 118 - PARTNER ACS 1600 DSL module User Guide...

  • Page 120: Deleting A Dlci

    The WAN Configuration Menu displays. 2. Select Configure DLCIs. The FR DLCI Config Menu displays. ***************************************** FR DLCI Config Menu ***************************************** 1. Add New DLCI 2. Modify Existing DLCI 3. Delete DLCI Avaya, Inc. - 119 - PARTNER ACS 1600 DSL module User Guide...

  • Page 121: Configuring Frame Relay Options

    The WAN Configuration Menu displays. 2. Select Configure FR Options. The Frame Relay Options submenu displays. ***************************************** Frame Relay Options ***************************************** 1. Configure Fragmentation 2. Configure Maintenance Protocol 3. Configure Congestion Parameters Avaya, Inc. - 120 - PARTNER ACS 1600 DSL module User Guide...
  • Page 122 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 121 - PARTNER ACS 1600 DSL module User Guide...

  • Page 123: Configuring The Maintenance Protocol

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 122 - PARTNER ACS 1600 DSL module User Guide...

  • Page 124: Configuring The Congestion Parameters

    FECN/BECN condition clear size FECN/BECN max number of bytes to store You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on Avaya, Inc. - 123 - PARTNER ACS 1600 DSL module User Guide...

  • Page 125: Configuring The Voice Path

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 124 - PARTNER ACS 1600 DSL module User Guide...

  • Page 126: Setting The Slic Control Mode

    Echo cancellation automatically disables when the PARTNER ACS 1600 DSL module detects a FAX or modem signal. At Avaya, Inc. - 125 - PARTNER ACS 1600 DSL module User Guide...
  • Page 127 To set echo cancellation by port, select Configure Echo Cancellation default setting per port. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on Avaya, Inc. - 126 - PARTNER ACS 1600 DSL module User Guide...
  • Page 128 PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 127 - PARTNER ACS 1600 DSL module User Guide...

  • Page 129: Router Configuration

    IP address to both the LAN and WAN ports – each with different subnet masks. You can assign up to 8 IP addresses on each of the WAN and LAN ports. Avaya, Inc. - 128 - PARTNER ACS 1600 DSL module User Guide...
  • Page 130 Priority 255.255.255.0 255.255.255.0 NORMAL Enter connection to configure: 4. Type the ID number of the connection that you want to configure (range = 0-7), and then press ENTER. Avaya, Inc. - 129 - PARTNER ACS 1600 DSL module User Guide...

  • Page 131: Enabling Rip Poisoned Reverse

    For RIP to work, you must enable RIP globally or locally (by port), and then setting the RIP version. The order in which you perform the procedures is irrelevant. Avaya, Inc. - 130 - PARTNER ACS 1600 DSL module User Guide...

  • Page 132: Enabling Rip Poisoned Reverse Globally

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 131 - PARTNER ACS 1600 DSL module User Guide...

  • Page 133: Enabling Rip Poisoned Reverse By Port

    3. Type the number of the port for which you want to enable poisoned reverse. The following instructions display on-screen: RIP Poisoned Reverse for Slot 1, Port 1 is currently DISABLED Enter E to Enable, D to Disable : Avaya, Inc. - 132 - PARTNER ACS 1600 DSL module User Guide...

  • Page 134: Setting The Rip Version

    The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use. Avaya, Inc. - 133 - PARTNER ACS 1600 DSL module User Guide...
  • Page 135 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 134 - PARTNER ACS 1600 DSL module User Guide...

  • Page 136: Adding A Static Route

    3. Select Add a Static Route. 4. Type the destination address that you want to add, and then press ENTER. 5. Type the network mask, and then press ENTER. Avaya, Inc. - 135 - PARTNER ACS 1600 DSL module User Guide...

  • Page 137: Adding A Default Route

    2. Select Add/Remove a Static Route. The Router Modification Menu displays. ***************************************** Router Modification Menu ***************************************** A. Add a Static Route R. Remove a Route F. Add/Change the Default Route Avaya, Inc. - 136 - PARTNER ACS 1600 DSL module User Guide...

  • Page 138: Disabling Bridging

    R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay Avaya, Inc. - 137 - PARTNER ACS 1600 DSL module User Guide...

  • Page 139: Disabling Bridging By Port

    H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry Avaya, Inc. - 138 - PARTNER ACS 1600 DSL module User Guide...

  • Page 140: Disabling Stp

    Bridge Configuration Menu ***************************************** G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port Avaya, Inc. - 139 - PARTNER ACS 1600 DSL module User Guide...

  • Page 141: Disabling Stp By Port

    H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry Avaya, Inc. - 140 - PARTNER ACS 1600 DSL module User Guide...
  • Page 142 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 141 - PARTNER ACS 1600 DSL module User Guide...

  • Page 143: Bridge Configuration

    – it depends on your application. A router can improve overall efficiency for a complex network, but a bridge provides better speed and flexibility for the overall network. Avaya, Inc. - 142 - PARTNER ACS 1600 DSL module User Guide...

  • Page 144: Enabling Bridging

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 143 - PARTNER ACS 1600 DSL module User Guide...

  • Page 145: Enabling Bridging By Port

    Interfaces may or may not display, depending on the IAD in use. 3. Type the number of the port for which you want to disable bridging, and then type E. The Bridge Configuration Menu redisplays. Avaya, Inc. - 144 - PARTNER ACS 1600 DSL module User Guide...

  • Page 146: Setting The Bridge Aging Timer

    Enter Bridge Aging time in seconds (1..3600): (300) 3. Type the bridge aging time (range = 1-3600 seconds), or press ENTER to accept the default of 300 seconds. Avaya, Inc. - 145 - PARTNER ACS 1600 DSL module User Guide...

  • Page 147: Disabling Rip Poisoned Reverse

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 146 - PARTNER ACS 1600 DSL module User Guide...

  • Page 148: Disabling Rip Poisoned Reverse By Port

    The following instructions display on-screen: RIP Poisoned Reverse for Slot 1, Port 1 is currently DISABLED Enter E to Enable, D to Disable : 4. Type D. The Router Configuration Menu resplays. Avaya, Inc. - 147 - PARTNER ACS 1600 DSL module User Guide...

  • Page 149: Enabling Stp

    H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry Avaya, Inc. - 148 - PARTNER ACS 1600 DSL module User Guide...

  • Page 150: Enabling Stp By Port

    The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IAD in use. Avaya, Inc. - 149 - PARTNER ACS 1600 DSL module User Guide...
  • Page 151 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 150 - PARTNER ACS 1600 DSL module User Guide...

  • Page 152: Nat Configuration

    Enable NAT translation by port (factory default = disabled) Configure the NAT local server entry Configure the NAT Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) timeouts Configure the NAT port range Avaya, Inc. - 151 - PARTNER ACS 1600 DSL module User Guide...

  • Page 153: Enabling Nat Translation

    NAT, and then type E. The NAT Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on Avaya, Inc. - 152 - PARTNER ACS 1600 DSL module User Guide...

  • Page 154: Configuring The Nat Local Server Entry

    3. Type the local server entry to configure (range = 1-10), and then press ENTER. The following instructions display on-screen: Current NAT Local Server Translated IP Address = 0.0.0.0 Enter new NAT Local Server Translated IP address: Avaya, Inc. - 153 - PARTNER ACS 1600 DSL module User Guide...

  • Page 155: Configuring The Nat Timeouts

    TDP and UDP are similar, except that TCP tracks TCP clients on a per-connection basis and removes them from the table as soon as the connection closes. Avaya, Inc. - 154 - PARTNER ACS 1600 DSL module User Guide...

  • Page 156: Configuring A Nat Tcp Timeout

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 155 - PARTNER ACS 1600 DSL module User Guide...

  • Page 157: Configuring A Nat Udp Timeout

    You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 156 - PARTNER ACS 1600 DSL module User Guide...

  • Page 158: Configuring The Nat Port Range

    C. Display NAT Connection Table D. Display NAT Connection Details O. Display NAT Local Server Table X. Delete IP Address from NAT Tables Y. Delete NAT Local Server Entry Avaya, Inc. - 157 - PARTNER ACS 1600 DSL module User Guide...
  • Page 159 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 158 - PARTNER ACS 1600 DSL module User Guide...

  • Page 160: Dhcp Server Configuration

    S. Display DHCP Server Statistics A. Display DHCP Server Assigned Addresses U. Display DHCP Server Unassigned Addresses D. Display DHCP Entry Details X. Delete A DHCP Client Entry Avaya, Inc. - 159 - PARTNER ACS 1600 DSL module User Guide...

  • Page 161: Configuring The Dhcp Server Parameters

    A. Display DHCP Server Assigned Addresses U. Display DHCP Server Unassigned Addresses D. Display DHCP Entry Details X. Delete A DHCP Client Entry Y. Delete A DHCP Assignment Entry Avaya, Inc. - 160 - PARTNER ACS 1600 DSL module User Guide...
  • Page 162 7. Type the domain name to return to DHCP clients, and then press ENTER. The following instructions display on-screen: Current Lease time is 0 seconds Enter DHCP Lease Time in seconds Avaya, Inc. - 161 - PARTNER ACS 1600 DSL module User Guide...
  • Page 163 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 162 - PARTNER ACS 1600 DSL module User Guide...

  • Page 164: Configuring The Dhcp Address Range Pool

    3. Type the new high IP address, and then press ENTER. The following instructions display on-screen: Current Low IP address of range pool = 0.0.0.0 Enter new Low IP address: Avaya, Inc. - 163 - PARTNER ACS 1600 DSL module User Guide...
  • Page 165 You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter. Avaya, Inc. - 164 - PARTNER ACS 1600 DSL module User Guide...

  • Page 166: Verification

    For more information, see the “WAN configuration” chapter. You have a PC that has an Ethernet adapter and runs a TCP/IP stack. For more information, see the “Getting started” chapter. Avaya, Inc. - 165 - PARTNER ACS 1600 DSL module User Guide...

  • Page 167: Maintenance

    The PARTNER ACS 1600 DSL module Menu interface contains built-in utilities for maintenance and development. Before running the System Utilities, contact your local Authorized Dealer or call the Avaya Help Line at (800) 628 2888. Consultation charges may apply. Avaya, Inc.

  • Page 168: Displaying The Current Configuration

    P. Display PPP Authorization Entries U. Display System Uptime 2. Select Display Current Configuration. 3. Follow the on-screen instructions to view the information on the individual slots and ports. Avaya, Inc. - 167 - PARTNER ACS 1600 DSL module User Guide...

  • Page 169: Menu Hierarchy

    B. Clear Bridge Statistics P. Clear PPP Statistics D. Clear Frame Relay DLCI Statistics A. Clear ATM PVC Statistics A. Display ATM PVC Statistics Z. Clear ATM PVC Statistics Avaya, Inc. - 168 - PARTNER ACS 1600 DSL module User Guide...
  • Page 170 F. Add/Change the Default Route T. Remove the Default Route D. Display Route Table R. Enable/Disable RIP V. Configure RIP Version by Port P. Configure RIP Poisoned Reverse by Port Avaya, Inc. - 169 - PARTNER ACS 1600 DSL module User Guide...
  • Page 171 X. Delete one filter of the chosen type Z. Delete all filters of the chosen type S. Show IP filtering statistics Y. Clear IP filtering statistics D. Display Route Table Avaya, Inc. - 170 - PARTNER ACS 1600 DSL module User Guide...
  • Page 172 6. Nortel IMAS 7. ATM (Unframed, 1152kpbs Fixed) 8. Frame Relay (784 Kbps Fixed) 1. Configure Datalink Protocol 1. Totally Transparent 2. Raw HDLC 3. Cisco compatible HDLC Avaya, Inc. - 171 - PARTNER ACS 1600 DSL module User Guide...
  • Page 173 3. 768 Kbps 4. 384 Kbps 5. 192 Kbps 3. Set SDSL Speed to Auto Sense (Copper Mountain) 4. Enable/Disable Conexant Autobaud Mode 5. Set SDSL Sync Delay (Lucent) Avaya, Inc. - 172 - PARTNER ACS 1600 DSL module User Guide...
  • Page 174 2. Set Fragment Size 4. ATM RFC 1483 (Tunneling) 1. Configure Transmit CIR 2. Configure Receive CIR 3. Configure FRF.12 Fragmentation 1. Enable/Disable End-To-End FRF.12 2. Set Fragment Size Avaya, Inc. - 173 - PARTNER ACS 1600 DSL module User Guide...
  • Page 175 4. Show Current DLCIs 3. Configure PVCs (Datalink Protocol = ATM) 1. Add New PVC 1. AAL55 (None) 1. CBR 2. UBR 2. AAL0 (None) 1. CBR 2. UBR Avaya, Inc. - 174 - PARTNER ACS 1600 DSL module User Guide...
  • Page 176 1. PAP Client 1. CBR 2. UBR 2. PAP Server 1. CBR 2. UBR 3. CHAP Client 1. CBR 2. UBR 4. CHAP Server 1. CBR 2. UBR Avaya, Inc. - 175 - PARTNER ACS 1600 DSL module User Guide...
  • Page 177 4. CHAP Server 1. CBR 2. UBR 7. RFC 2364 (PPPoATM Using VC Muxing) 0. None 1. PAP Client 1. CBR 2. UBR 2. PAP Server 1. CBR 2. UBR Avaya, Inc. - 176 - PARTNER ACS 1600 DSL module User Guide...
  • Page 178 6. ANSI T1.617 Annex D Both 7. LMI Network (FRF.1.1) 8. LMI User (FRF.1.1) 9. LMI Both (FRF.1.1) 3. Configure Congestion Parameters 1. Configure Transmit Congestion Parameters 2. Configure Receive Congestion Parameters Avaya, Inc. - 177 - PARTNER ACS 1600 DSL module User Guide...
  • Page 179 L. Configure System Location C. Configure SNMP Community T. Configure SNMP Trap Host IP Address 8. Configure Login 1. Change User ID 2. Change User Password 3. Change NetMan Password Avaya, Inc. - 178 - PARTNER ACS 1600 DSL module User Guide...
  • Page 180 O. Update ACOS [acos.bin] 1. Receive via TFTP 2. Receive via XMODEM X. Update Entire System A. File Transfer Utilities 1. Receive via TFTP 2. Send or Receive via XMODEM Avaya, Inc. - 179 - PARTNER ACS 1600 DSL module User Guide...
  • Page 181 1. Always 1 M. Map Fr FECN To ATM EFCI F. False 0. Always 0 0. Always 0 1. Always 1 M. Map Fr FECN To ATM EFCI Avaya, Inc. - 180 - PARTNER ACS 1600 DSL module User Guide...
  • Page 182 A. Display DHCP Server Assigned Addresses U. Display DHCP Server Unassigned Addresses D. Display DHCP Entry Details X. Delete a DHCP Client Entry Y. Delete a DHCP Assignment Entry Avaya, Inc. - 181 - PARTNER ACS 1600 DSL module User Guide...
  • Page 183 2. Enable/Disable **PSTN ONLY** Derived Timing Debug Messages 3. Enable/Disable **Local Clock ONLY** Derived Timing Debug Messages Z. Diagnostics Menu P. POTS Diagnostics H. Hotline Test R. Ring Test Avaya, Inc. - 182 - PARTNER ACS 1600 DSL module User Guide...
  • Page 184 A. AUTO Control Mode M. MANUAL Control Mode U. Set Compander Mode (U-Law, A-Law) U. u-Law Mode A. A-Law Mode M. Set Debug Mode E. ENABLE Debug D. DISABLE Debug Avaya, Inc. - 183 - PARTNER ACS 1600 DSL module User Guide...
  • Page 185 C. Clear Statistics C. Configure D. Display Configuration C. Compression Format D. Debug Control L. Display Line Status D. Display Debug State/Flags C. Control Debug (Enable/Disable) S. Set Debug Flags Avaya, Inc. - 184 - PARTNER ACS 1600 DSL module User Guide...
  • Page 186 2. Print current configuration 3. Debugging Options 0. Enable/Disable all messages 1. Enable/Disable status/keep-alive messages 2. Enable/Disable provisioning messages 3. Enable/Disable state-transition messages 4. Unhide/Hide voice client IP interface (requires reset) Avaya, Inc. - 185 - PARTNER ACS 1600 DSL module User Guide...

  • Page 187: Partner Acs 1600 Dsl Module Specifications

    Network Address Translation (NAT) that allows you to share IP addresses DHCP for management of LAN addresses Protocols Eight Permanent Virtual Circuits (PVCs) Multiprotocol encapsulation over ATM (RFC 1483) PPP over ATM (RFC 2364) Avaya, Inc. - 186 - PARTNER ACS 1600 DSL module User Guide...
  • Page 188 Trivial File Transfer Protocol (TFTP) for software upgrade Environmental Operating Range: 0°C to 40°C Non-condensing humidity: 15% to 90% Physical Dimensions (W X L x H): 9.75" x 17.25" x 2.0" Avaya, Inc. - 187 - PARTNER ACS 1600 DSL module User Guide...

  • Page 189: Connector Pinouts

    C. Connector pinouts Console Signal Ground Tx Data Rx Data 10BaseT Connector Signal 100BaseT Connector Signal Avaya, Inc. - 188 - PARTNER ACS 1600 DSL module User Guide...
  • Page 190 SDSL Connector Signal Ring Avaya, Inc. - 189 - PARTNER ACS 1600 DSL module User Guide...

  • Page 191: Usi Cables

    The DB25 connector, which must be shielded, is wired for RS- 530, which is a superset of all the other hardware interfaces. Only RS-530 uses DB25 connectors - the other hardware interfaces use different types of connectors. Avaya, Inc. - 190 - PARTNER ACS 1600 DSL module User Guide...
  • Page 192 Transmit DCE Clock (A) Receive Data (B) Receive DCE Clock (A) Request to Send (B) DTE Ready (A) DCE Ready (B) DTE Ready (B) Transmit DTE Clock (A) Avaya, Inc. - 191 - PARTNER ACS 1600 DSL module User Guide...
  • Page 193 Transmit DCE Clock (A) Receive Data (B) Receive DCE Clock (A) Request to Send (B) DTE Ready (A) DCE Ready (B) DTE Ready (B) Transmit DTE Clock (A) Avaya, Inc. - 192 - PARTNER ACS 1600 DSL module User Guide...

  • Page 194: Ip Filtering

    The order of the filters matters if you are mixing filters with different actions or if you want the overlapping filters to display accurate statistics. Avaya, Inc. - 193 - PARTNER ACS 1600 DSL module User Guide...

  • Page 195: Glossary

    Fast Ethernet Any number Mbps Ethernet specifications. Frame Relay a network interface providing high-speed packet transmission with minimum delay. Uses variable- length packets called "frames.” Contrast with "packet." Avaya, Inc. - 194 - PARTNER ACS 1600 DSL module User Guide...
  • Page 196 QOS selection. Local Area Network. Privately owned network- connecting devices over a limited geographic area. May use TCP/IP or one of several other protocols. Avaya, Inc. - 195 - PARTNER ACS 1600 DSL module User Guide...
  • Page 197 Network layer – responsible for connectivity, path selection, and routing. Transport layer – responsible network communication, virtual circuit management, fault detection, and flow control. Session layer - manages sessions between applications. Avaya, Inc. - 196 - PARTNER ACS 1600 DSL module User Guide...
  • Page 198 Statistics collection, performance, and security. Subnet Mask 32-bit address mask that indicates the bits of an IP address used for the subnet address. Avaya, Inc. - 197 - PARTNER ACS 1600 DSL module User Guide...
  • Page 199 Wide Area Network. Data communications network that serves users across a broad geographic area and often uses transmission devices provided by common carriers. Frame Relay is an example of a WAN. Avaya, Inc. - 198 - PARTNER ACS 1600 DSL module User Guide...

  • Page 200: Index

    100BaseT, 184 ATM, 184 10BaseT ETHERNET, ATM options configuring, 102 specifications, 176 ATM PVCs configuring, 98 Auto Log off, 11 Avaya Help Line, 156 ACOS upgrading, 87 upgrading using TELNET, 89 BOOTP, 184 upgrading using Bridge aging timer TFTP, 87...
  • Page 201 Configure F4 OAM Pool, 57 VPI, 47 Configure DHCP Configure Payload Client Entry, 57 Scrambling, 47 Configure DHCP Configure Bridge, 30 Server Parameters, Configure Bridge aging timer, 31 Avaya, Inc. - 200 - PARTNER ACS 1600 DSL module User Guide...
  • Page 202 Configure NAT Port Configure Interface Range, 60 Configure ATM Configure NAT TCP Options, 47 Timeout, 60 Configure DLCIs, 38 Configure NAT UDP Configure FR Timeout, 60 Options, 45 Avaya, Inc. - 201 - PARTNER ACS 1600 DSL module User Guide...
  • Page 203 Change NetMan Trap Host IP password, 49 Address, 49 , 49 Configure System Change User ID, 49 Contact, 48 Change User Configure System password, 49 Location, 48 Configure USI Avaya, Inc. - 202 - PARTNER ACS 1600 DSL module User Guide...
  • Page 204 Debug Control, 70 Cell, 103 Statistics, 70 Configuring the Copy file, 51 Maintenance Protocol, 112, 113 Configuring the NAT Datalink Protocol local server entry, changing, 91 Debug Control, 70 Avaya, Inc. - 203 - PARTNER ACS 1600 DSL module User Guide...
  • Page 205 153 Display IAD State, 73 Configuring the Display Interface DHCP server Statistics, 16 parameters, 150 Display Jitter Delay, 67 Enabling DHCP, 149 Display Media Statistics, 17 Avaya, Inc. - 204 - PARTNER ACS 1600 DSL module User Guide...
  • Page 206 Exiting, 11 Enable/Disable bridging globally, 31 Enable/Disable Derived Timing, 63 F4 OAM Cell Enable/Disable Derived configuring, 103 Timing Debug Fast Ethernet, 184 Messages, 63 FECN/BECN condition clear size Avaya, Inc. - 205 - PARTNER ACS 1600 DSL module User Guide...
  • Page 207 Configuring a port IP Front View, 4 address, 7 Full Duplex, 185 Running the Telnet program, 9 Using a Telnet Hard Reset or Reload program, 7, 117 ACOS from FLASH, Avaya, Inc. - 206 - PARTNER ACS 1600 DSL module User Guide...
  • Page 208 Network Interface Frame Relay Options, Modules, 176 LAN Configuration, Main, 13 OAM Loopback Reports, 14 sending, 104 SDSL Configuration, Operational test, 155 OSI Reference Model, USI Configuration Menu, 36 Avaya, Inc. - 207 - PARTNER ACS 1600 DSL module User Guide...
  • Page 209 Quick Configuration, 35, Configure LAN, 48 Configure Login, 49 Configure NAT, 60 Configure Tollbridge Voice Client, 74 Receive Committed Configure WAN, 34 Information Rate CopperCom Call (CIR) Control, 70 Avaya, Inc. - 208 - PARTNER ACS 1600 DSL module User Guide...
  • Page 210 RIP poisoned reverse (u-Law, A-Law), 67 disabling, 136 Set Debug Mode, 68 disabling by port, 137 Set Jitter Delay, 66, 67 disabling globally, Set SLIC Control Mode, enabling, 120 Avaya, Inc. - 209 - PARTNER ACS 1600 DSL module User Guide...
  • Page 211 Defaults, 51 Set System Defaults, Configuring the System Name, 80 Trace Route, 50 Configuring the Trap Update ACOS, 52 Host IP Address, Update Entire System, 53 Enabling/disabling, 79 Avaya, Inc. - 210 - PARTNER ACS 1600 DSL module User Guide...
  • Page 212 User IDs Set Voice Gateway, default, 6 configuring, 94 Setting electrical WAN, 188 configuration, 36 Setting electrical USI Configuration configuration, 36 Menu, 36 Setting interface type, USI Datarate submenu, Avaya, Inc. - 211 - PARTNER ACS 1600 DSL module User Guide...
  • Page 213 Loopback, 104, 115 Configuring Payload Setting the jitter Scrambling, 103 delay, 114, 117 Configuring the F4 WAN Datalink Protocol OAM Cell, 103 Configuration Menu, Configuring the Maintenance Protocol, 112, 113 Avaya, Inc. - 212 - PARTNER ACS 1600 DSL module User Guide...

This manual is also suitable for:

Partner acs 1600 dsl

Table of Contents