Table of Contents
Advertisement
Avaya, Inc.
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.
ENTER.
2. Configure Copper Mountain Fragmentation
Displays the FR FRF.12 Configuration submenu,
which contains the following commands.
1. Enable/Disable CuMtn Fragmentation
Enables
fragmentation.
2. Set Real-Time DLCI
Sets a real time value for a DLCI port.
Type the number of the port, and then press
ENTER.
2. Configure Maintenance Protocol
Displays the Frame Relay Maintenance Protocol submenu,
which contains the following commands to set the Frame
Relay maintenance protocol:
0. None
1. CCITT Q.933 Annex a Network
2. CCITT Q.933 Annex a User
3. CCITT Q.933 Annex a Both
4. ANSI T1.617 Annex D Network
5. ANSI T1.617 Annex D User
6. ANSI T1.617 Annex D Both
7. LMI Network (FRF.1.1)
8. LMI User (FRF.1.1)
9. LMI Both (FRF.1.1)
Select your choice.
3. Configure Congestion Parameters
Displays the FR Congestion Configuration submenu, which
contains the following commands to configure fragmentation.
1. Configure Transmit Congestion Parameters
Follow the on-screen messages to enter the following
transmit congestion parameter information.
FECN/BECN condition set size
FECN/BECN condition clear size
FECN/BECN maximum number of bytes to store
- 56 - PARTNER ACS 1600 DSL module User Guide
To accept this value, press
and
disables
Copper
Mountain
Advertisement
Table of Contents
