Avaya PARTNER 1600 DSL MODULE User Manual page 112

Avaya, Inc.
6. Type a VCI between 32 – 65535 (default = 38 – data or 39
– voice), and then press ENTER.
The ATM Encapsulation
displays.
*****************************************
* ATM Encapsulation Configuration
*****************************************
Current Encapsulation : NONE
1. AAL5 (None)
2. AAL0 (None)
3. Proprietary Voice
4. RFC 1483 (using VC Muxing)
5. RFC 1483 (with LLC Encapsulation)
6. RFC 2364 (PPPoATM with LLC
Encapsulation)
7. RFC 2364 (PPPoATM using VC Muxing)
7. Select the encapsulation you want to configure.
If you select
Encapsulation) or RFC 2364 (PPPoATM using VC
Muxing), follow the on-screen messages to set the PPP
authorization type. Once complete, continue with step 8.
The ATM Service Category Configuration submenu
displays.
*****************************************
* ATM Service Category Configuration
*****************************************
1. CBR
2. UBR
8. Do one of the following:
Select CBR for high priority data.
Select UBR for low priority data.
9. Follow the on-screen messages to set the Peak Cell Rate
(PCR) value.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
- 111 - PARTNER ACS 1600 DSL module User Guide
Configuration
RFC 2364 (PPPoATM
submenu
*
with LLC
*