Avaya PARTNER 1600 DSL MODULE User Manual page 127

Avaya, Inc.
the conclusion of the FAX or modem session, echo
cancellation automatically re-enables.
To configure echo cancellation:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default
Settings
2. Select Configure Echo Cancellation Default Settings.
The Echo Cancellation Default Settings Configure
Menu displays.
*******************************************
* Echo Cancellation Default Settings
Configure Menu *
*******************************************
1. Set Echo Cancellation default setting
for all ports
2. Display current Echo Cancellation
default settings
3. Configure Echo Cancellation default
setting per port
3. Do one of the following, and then follow the on-screen
messages:
To set the same setting for all ports, select Set
Echo Cancellation default setting for all ports.
To display the current settings for all ports, select
Display
settings.
To set echo cancellation by port, select Configure
Echo Cancellation default setting per port.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
- 126 - PARTNER ACS 1600 DSL module User Guide
current Echo Cancellation
*
default