Table of Contents
Advertisement
Avaya, Inc.
E. Edit the filter in the copy buffer
Edits the filter in the copy buffer.
Follow the on-screen messages to enter the
following information:
Filter state – Idle or Active
Filter action – Pass or Discard
Filter protocol – IP, ICMP, IGMP, TCP,
UDP
Filter Source IP Low Address
Filter Source IP High Address
Filter Source Port Low – TCP or UDP
packets only
Filter Source Port High - TCP or UDP
packets only
Filter Destination IP Low Address
Filter Destination IP High Address
Filter Destination Port Low
Filter Destination Port High
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
X. Deletes the filter in the copy buffer
Deletes the filter in the copy buffer.
X. Delete one filter of the chosen type
Deletes the filter that you select from the copy buffer.
Type the number of the filter to delete and then press
ENTER.
Z. Delete all filters of the chosen type
Deletes all filters in the copy buffer.
S. Show IP filtering statistics
Displays the total number of input and output data
packets filtered.
Y. Clear IP filtering statistics
Deletes all data from the Show IP filtering statistics
command.
- 38 - PARTNER ACS 1600 DSL module User Guide
Advertisement
Table of Contents
