Avaya PARTNER 1600 DSL MODULE User Manual page 51

Avaya, Inc.
2. Modify Existing DLCI
Type the DLCI number, press ENTER, and then
choose a command from the FR Encapsulation
Configuration submenu.
1. RAW (No Encapsulation)
2. Proprietary Voice DLCI
3. RFC 1490
4. ATM RFC 1483 (Tunneling)
Select your choice, and then choose a command from
the FR DLCI Options submenu.
1. Configure Transmit CIR
Follow the on-screen messages to enter the
following information.
Questions below may or not display, depending
on the options that you select.
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
2. Configure Receive CIR
Follow the on-screen messages to enter the
following information. Questions below may or
not display, depending on the options that you
select.
The PARTNER ACS 1600 DSL module displays
a default or last-used value in parentheses to
the left of the command prompt. To accept this
value, press ENTER.
- 50 - PARTNER ACS 1600 DSL module User Guide
Transmit Committed Information Rate
(CIR)
Committed burst size (Bc)
Circuit Throughput
Excess burst size (Be)
Receive Committed Information Rate
(CIR)
Committed burst size (Bc)
Circuit Throughput
Excess burst size (Be)