Avaya PARTNER 1600 DSL MODULE User Manual page 162

Avaya, Inc.
2. Select Configure DHCP Server Parameters.
The following instructions display on-screen:
Current Gateway address = 0.0.0.0
Enter new Gateway IP address:
3. Type the new gateway IP address, and then press
ENTER.
If there is no gateway available, type the address of the
Ethernet port.
The following instructions display on-screen:
Current DNS Server address = 0.0.0.0
Enter new DNS Server IP address:
4. Type the new DNS server IP address, and then press
ENTER.
The following instructions display on-screen:
Current NetBIOS Server address = 0.0.0.0
Enter new NetBIOS Server address:
5. Type the new NetBIOS server IP address, and then press
ENTER.
The following instructions display on-screen:
Current Subnet Mask = 0.0.0.0
Enter new Subnet Mask:
6. Type the subnet mask to return to DHCP clients, and then
press ENTER.
The following instructions display on-screen:
Current Domain name =
Enter new Domain Name:
7. Type the domain name to return to DHCP clients, and then
press ENTER.
The following instructions display on-screen:
Current Lease time is 0 seconds
Enter DHCP Lease Time in seconds
- 161 - PARTNER ACS 1600 DSL module User Guide