Send And Receive Modem - AT&T PARTNER II Release 3.1 Programming And Use Instructions

Send and Receive Modem

If you need to place and receive calls with the modem, use the setup shown in
Figure 4-10. This setup makes line A the primary modem line, but keeps the line
available for users at other extensions when all other lines are busy.
To Use
Calls on the modem line (line A) ring only at extension X. Likewise, line A is the
Iast line selected by other extensions in the system, so the modem line is
unavailable for the modem only when all other lines in the system are being
used.
To Program
1. Set Automatic Line Selection for all other extensions so that line A is the last
line in the select sequence. That way, the modem line is used for outgoing
voice calls only when all other lines are busy.
2. Set Line Ringing for all lines assigned to extension X to No Ring.
3. Use Line Assignment (#301) to assign one or more lines to extension X.
4.
Set Automatic Extension Privacy (#304) for extension X to Assigned.
4-20
Using Auxiliary Equipment
Modem
Line A
Lines
CONTROL
UNIT
Figure 4-10. Send and Receive Modem
Ext
x
MODEM