Table of Contents
Advertisement
Intercom Dial Tone (#309)
This System Programming procedure determines the type of dial tone that the
system provides at an extension. It may be necessary to change this setting to
Machine (outside line) dial tone for an autodialing device, such as a fax or
modem, that has trouble making calls. For example, if you have a modem that
checks for outside line dial tone before dialing, use this procedure to change
from Regular to Machine dial tone.
Considerations
Use this procedure only if an autodialing device has trouble making calls.
Valid Entries
1 = Regular dial tone
2 = Machine (outside line) dial tone
Programming
To change the Intercom Dial Tone setting for an extension:
Press [
1.
At the Extension: prompt, enter the number of the extension to be
2.
programmed. For example, to select extension 22, press [
To change the Intercom Dial Tone setting, press [
3.
appropriate value displays.
4.
To program another extension, press [
number shows on the display. Then repeat Step 3.
5.
Select another procedure or exit programming mode.
5-90
Intercom Dial Tone (#309)
] [
] [
] [
Feature
0
0
System Program
] [
] [
] [
] [
System Program
#
3
] until the
Next Data
] or [
Next Item
Prev Item
] [
].
0
9
] [
].
2
2
] until the extension
Advertisement
Chapters
Table of Contents
