Copy Settings (#399) - AT&T PARTNER II Release 3.1 Programming And Use Instructions

Copy Settings (#399)

Description
This System Programming procedure copies all of the following settings from
one extension to another:
#301 Line Assignment
#302 Line Access Restriction
#303 Display Language
#304 Automatic Extension Privacy
#305 Abbreviated Ringing
#307 Forced Account Code Entry
#308 Distinctive Ring
#309 Intercom Dial Tone
#310 Automatic VMS Cover
#311 Emergency Telephone
#312 Voice Announce On Busy
Considerations
This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (#399) directly.
For each type of phone, program one extension and then use this procedure
to copy the programming from that extension to the others with the same
number of line buttons (for example, from an MLS-12D to an MLS-12).
Programming
To copy the programmed settings of one extension to another of the same type:
1. Press [
Feature
2. At the Extension: prompt, enter the extension to copy from. For example,
to copy the current settings for extension 18, press [
At the Data -- prompt, enter the source extension to copy to—any extension
3.
except the source extension is valid. For example, to copy to extension
22, press [
4. At this point:
To copy the same settings to another extension, enter the new
extension number.
To copy another extension's settings, press [
the extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
] [ ] [ ] [
0 0 System Program
] [ ].
2 2
#401 Outgoing Call Restriction
#405 Disallowed List Assignments
#408 Allowed List Assignments
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group
#505 Hunt Group Extensions
#601 Fax Machine Extensions
#607 AA Extensions
Automatic Line Selection
Line Ringing
] [ ] [ ] [ ] [
System Program # 3 9
] [ ].
1 8
] or [
Next Item
Copy Settings (#399)
] [ ].
9
] until
Prev Item
5-39