Table of Contents
Advertisement
Using Features
Send/Remove Message
Press the programmed line button labeled Send/Remove
Message to turn on co-workers' message lights and to leave
messages on display phones.
When you send a message to co-workers with digital/ISDN
(MLX) display phones, it turns on their message light and
delivers the message ATT OPERATR. The message also
shows the date and time and your extension.
When you send a message to co-workers with analog multiline
display phones, it turns on their message lights and delivers
the message Call OPERATR.
The Send/Remove Message button also turns off a co-
worker's message light and cancels the operator message
delivered to display phones. If you have a MERLIN II System
Display Console, you can make sure you don't turn off a
message light set by another operator by using the Message
Status button. To check the status of your co-worker's
message light, press the Message Status button. If the light
next to your co-worker's DSS button is on, your co-worker's
message light is on.
M e s s a g i n g 4 - 2 1
Advertisement
Table of Contents
