AT&T PARTNER II Release 3.1 Programming And Use Instructions page 102

Automatic System Answer Delay (#110)
This System Programming procedure specifies the number of times (0–9) an
incoming call should ring before it is answered by the system.
Related Features
Automatic System Answer affects incoming calls only on lines identified
using Automatic System Answer Lines (#204).
You must program a button on the system display phone at extension 10 to
turn Automatic System Answer on and off. Use Automatic System Answer
Button (#111) to program the button.
You must use Automatic System Answer Record/Playback to record the
greeting callers hear when the system answers an incoming call.
Considerations
This feature works independently of Line Ringing, which determines how an
outside call rings at the extension—immediately, after a 20 second delay, or not
at all. Automatic System Answer Delay specifies the number of rings a caller
hears before the system answers the call.
Valid Entries
0–9 (0 rings = answered immediately)
2
Programming
To change the number of times an incoming call rings at extension 10 before the
system answers it:
Press [
1.
To change the number of rings, press [
2.
displays—see "Valid Entries" above.
Select another procedure or exit programming mode.
3.
] [ ] [ ] [
Feature 0 0 System Program
Automatic System Answer Delay (#110)
] [ ] [ ] [ ] [
System Program # 1
] until the appropriate value
Next Data
] [ ].
1 0
5-19