AT&T PARTNER II Release 3.1 Programming And Use Instructions page 128

Programming
To identify the lines on which outside calls should be answered for Direct
Extension Dial:
1. Press [
Feature
2. Enter the desired line number (01–24). For example, to specify line 1, enter
[ ] [ ].
0 1
3. To assign or unassign Direct Extension Dial, press [
appropriate value displays.
To specify another line, press [
4.
number shows on the display. Then repeat Step 3.
Repeat Steps 3 and 4 for all desired lines.
5.
Select another procedure or exit programming mode.
6.
] [ ] [ ] [ ] [
0 0 System Program System Program
Next Item
Direct Extension Dial Lines (#205)
] [ ] [ ] [ ] [
# 2 0 5
] until the
Next Data
] or [ ] until the correct line
Prev Item
].
5-45