AT&T PARTNER II Release 3.1 Programming And Use Instructions page 178

Programming
To restrict an extension from making calls on a specific line:
1. Press [
Feature
At the Extension: prompt, enter the number of the extension to be
2.
programmed. For example, to program extension 23, press [
At the Line: prompt, enter the line number to be restricted at this extension.
3.
For example, to restrict line 2, press [
displays.
To change the line restriction for this extension, press [
4.
appropriate value displays—see "Valid Entries" on the previous page.
At this point:
5.
To restrict another line at this extension, press [
until the line number shows on the display. Then repeat Step 4.
To restrict another extension, press [
begin at Step 2.
Select another procedure or exit programming mode.
6.
] [ ] [ ] [ ] [
0 0 System Program
Line Access Restriction (#302)
] [ ] [ ] [ ] [
System Program # 3 0
2
] [ ]. The current restriction
0 2
Next Data
] or [
Next Item
] [
Next Procedure Prev Procedure
].
2
] [ ].
3
] until the
]
Prev Item
] and
5-95