Fax Machine Extensions (#601) - AT&T PARTNER II Release 3.1 Programming And Use Instructions

Fax Machine Extensions (#601)

Description
This System Programming procedure identifies extensions to which fax
machines are connected.
Related Features
If you want to monitor fax machine status and make one-touch transfers to
the fax machine, see Auto Dialing to program a Fax Management button
and "Fax Management Feature" in Chapter 4 to use the button.
To prevent other extensions from interrupting a fax call, program the fax
extension for Automatic Extension Privacy (#304).
Considerations
Remove voice messaging system mailboxes from fax machine extensions.
If an automatic fax call comes in on a line covered by the PARTNER MAIL
system, the Automated Attendant Service of that system may be
programmed to automatically transfer the call to a fax extension or to the
extension Hunt Group for the fax machines (if you have multiple fax
machines). See the PARTNER MAIL documentation for instructions.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
To identify a Fax Machine Extension:
1 . Press [
2 . At the Extension: prompt, enter the extension to which the fax machine is
connected. For example, to select extension 30, press [
To assign or unassign the extension, press [
3 .
value displays.
4 . To identify another extension, press [
number shows on the display. Then repeat Step 3.
Select another procedure or exit programming mode.
5 .
5-68 Fax Machine Extensions (#601)
] [ ] [ ] [
Feature 0 0 System Program
] [ ] [ ] [ ] [
System Program # 6
] [
3
] until the appropriate
Next Data
] or [ ] until the extension
Next Item Prev Item
] [ ].
0 1
].
0