Test Each Voice Terminal For A Dial Tone; Label Voice Terminals With Intercom Numbers - AT&T MERLIN 1030 Installation Manual

TEST EACH VOICE TERMINAL FOR A DIAL TONE

1
Lift the handset.
The green light goes on next to the shining red light, and you hear a dial
tone.
Press one or more of the dial pad buttons.
2
The dial tone stops.

LABEL VOICE TERMINALS WITH INTERCOM NUMBERS

1
Make an intercom label for each voice terminal.
2
Pry the plastic intercom number cover away from its slot below the hand-
set using an object such as a straightened paper clip.
3
Lay the intercom number card in the slot, and replace the cover.
4
Verify the voice terminal's intercom number:
Touch the fifth button down in the left row of buttons
(Intercom-Ring).
Lift the handset.
Dial the voice terminal's intercom number.
A busy signal verifies the intercom number.
24
1
2
1
Intercom 15
2
3