AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual page 83

Features
To Send a Message (MERLIN II
Display Console)
1. Press the Message Status button to check whether or
not an operator message is present.
The red light goes on.
If the green light next to the DSS button is on,
If the green light next to the DSS button is off,
2. Press the Send/Remove Message button, or press the
programmed Feature button and dial 38, then press
the DSS button to turn on your co-worker's message
light.
3. Press the Message Status button to return to call
handling.
The red light goes out.
To Turn Off Message Lights (MERLIN
II Display Console)
1. Press the Message Status button.
2. Check the green light next to the DSS button. If
necessary, use the Shift button to locate the extension.
4 - 3 4 Messaging
there is a message.
there is no message.
If the light is on, press the Send/Remove
Message button, or press the programmed
Feature button and dial 38, and press the DSS
or Auto Dial button for the extension to turn off
co-worker's message light.