AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual page 36

Quick Start
The following table shows the types of distinctive rings and
the information you see on your display and console when
you receive calls.
You hear
(Distinctive
You see...
Ring)...
Green flashing light
2 rings
beside line button
Green flashing light
1 ring
beside SA or
ICOM/fast flashing
light beside DSS
button
Green steady light
Caller's
next to SA or ICOM
voice
and steady light
beside DSS button
Green flashing light
3 rings
* If your company subscribes to AT&T's INFO2 automatic number identification (ANI)
service, the caller's telephone number is shown for outside calls. The availability of
the caller identification information may be limited by local-serving (caller's)
jurisdiction, availability, or central office equipment.
† Will show line label, if one has been programmed.
‡ If a transfer is not completed because the person is unavailable, the call returns to
your console for further handling. Unanswered Camp-On calls and unanswered
parked calls also return to your console.
Identifying Call Types
2 - 4
beside line
button/slow flashing
light beside DSS
button of the
extension to which
you transferred the
call
Display shows...
Blank screen*†
Caller's extension
number or name
Caller's extension
number or name
Tfr Ret +
extension number
or name
Call Type
Outside
Inside
Inside
Returning‡