AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual page 108

Features
If your system is not programmed for One-Touch Transfer,
you can use the following alternative method for transferring
an outside call only to a co-worker whose phone has the
same line buttons as your console.
1. Check the light next to the DSS or Auto Dial button for
the person's extension.
Press the button for the person's extension.
2.
The call is put on hold and the extension is dialed automatically.
Announce the line that the call is on.
3.
To Transfer to an Inside Extension
Using One-Touch Transfer
If your system is programmed for One-Touch Transfer, it is
also programmed either for automatic completion or manual
completion. Automatic completion sends the call directly to
the extension. Manual completion lets you consult with the
person, if you wish, before sending the call.
If the light is on, the person is unavailable.
See "Handling an Unsuccessful Transfer" in this section.
If the light is off, go to Step 2.
If the person accepts the call, hang up.
He or she can answer the call by pressing the button with
the call.
If the person does not accept the call, press the
line button with the held call to return to the call.
4-59
Transfer