Park - AT&T MERLIN LEGEND Release 2.0 Analog Direct-Line Console Operator's Manual

Features

Park

When transferring a call, you may find that your co-worker
cannot be located. Use Park to hold the call and use Paging
to announce the call over the person's speakerphone or over
the building's loudspeaker system. (For more information,
see "Paging" in this chapter.)
When you park a call, you put
answered from any telephone
parked at your extension or at
cannot park a call at a Park Zone where another call is
parked.)
Your co-worker can then pick up the call from the nearest
telephone by using Pickup and dialing the extension you
announced. If the call is not picked up after a set time, it
returns to your console.
You can use Park with a programmed Park or Park Zone
button. You can also use Transfer to park a call.
N O T E :
Park Zone and Paging features must be
programmed system-wide.
You must have Park Zones (maximum 8),
Speakerphone Paging group numbers and/or
Loudspeaker Paging access codes and line
numbers.
it on hold so it can be
in the system. Calls can be
a specific Park Zone. (You
Park 4-45