Table of Contents
Advertisement
Understanding Your Equipment
Line and DSS Buttons
Your console's line buttons and/or DSS buttons are already
programmed and labeled for specific functions, depending on
your company.
Line Buttons
The BIS-22D has 22 line buttons and the BIS-34, BIS-34D, and
®
MERLIN
II System Display Console have 34 line buttons.
Two or more of your line buttons are programmed as either
ICOM (Intercom) or SA (System Access) buttons. You cannot
have both.
If you have ICOM buttons use them for
buttons
labeled with phone numbers or
service
(such as WATS) for outside calls.
If you have SA buttons, use them for inside and outside calls.
You must first enter a dial-out code (usually 9) to make an
outside call on an SA button. You can also use a button
labeled with Pool or the name of a special service (such as
WATS) to make an outside call.
inside calls only. Use
the name of a special
Line and DSS Buttons
1 - 1 1
Advertisement
Table of Contents
