Table of Contents
Advertisement
Using Features
Night Service
Night Service is used to cover phones after-hours by sending
incoming calls to a specific phone, such as the security office,
or by having them ring a night bell or other alert. To prevent
unauthorized after-hours use of phones, Night Service can be
set up so that you have to enter a password to make an
outside call.
Night Service can be programmed to automatically turn on
and off at preset times. If your system is not programmed this
way, you must turn Night Service on when you leave for the
night and off when you start your day.
Must be programmed system-wide.
May require passwords.
May be set up for automatic on/off.
Must have programmed line button on console.
To Program a Night Service Button
1.
Label button to be programmed as Night Service.
2.
Slide T/P switch to P.
3.
Press button you labeled Night Service.
4.
Dial *39.
5.
Slide T/P switch to center.
Night Service 4 - 2 7
Advertisement
Table of Contents
