Bios Utility Operation - ECS 761GXM-M2 Manual

Confirming Windows 98/Me Driver Installation
1 From Windows 98/Me, open the Control Panel from "My Computer"
followed by the System icon.
2 Choose the "Device Manager" tab.
3 Click the "+" in front of "IDE ATA/ATAPI Controllers" hardware type. The
driver "SiS 180 IDE Dual Channel" and "SiS 180 IDE/RAID Control-
ler" should appear.

BIOS Utility Operation

BIOS Utility supports windows 2000/XP/98/Me.
Starting BIOS Utility
1 Boot your system. If this is the first time you have booted with the
SiS965L and the drives installed, the BIOS will display the following:
Silicon Integrated Systems Corp. RAID BIOS Setting Utility v0.XX
(c) 2003-2005 Silicon Integrated Systems Corp. All Rights Reserved.
Press <Ctrl.<S> to run BIOS Setting Utility
2 Press <Ctrl-S> keys to display the SiS965L Utility Main Menu.
3 You can press <B> key to select the boot disk on the 965L controller.
The yellow highlight will show on the disk and you can switch it to
select the disk you wanted. Press "Enter" key to select it and the
selected boot device will be marked by "*". The default boot device will
be set as Disk 1.
4 Press <R> to display the RAID setup menu below. This is the fastest
and easiest method to creating your first array.
45