Setup Review Exercise; Load Paper - Xerox 8550YDP - Phaser Color Solid Ink Printer User Manual

Setup Review Exercise

The answers for this exercise are located in the Appendix on page 90.
1. According to the Setup Guide, what is the first step of the installation process? ______________
_____________________________________________________________________________
2. How many people are required to lift the printer? _____________________________________
3. Which sides of the printer can be within 10 cm (4 in) of the wall? ________________________
4. The surface on which the printer is placed must be level from side-to-side within how many
inches? ______________________________________________________________________

Load Paper

This lesson provides general guidelines for loading paper and specialty media. Tips and hints for
loading the trays are also provided. Use the Phaser 8400 Reference Guide, the Phaser 8500/8550
User Guide, or the embedded Paper Tips Page when completing this lesson. Electronic versions
are available from the training CD-ROM's Resources section.
Users can refer to the printer driver and, on Phaser 8500 and 8550 printers, the CentreWare IS page to
determine the current media type and size settings as shown in the examples below.
CentreWare IS Paper Tray Settings
(Phaser 8500 and 8550 only)
page 28
If you do not have a printer, refer to the Setup Guide and complete this exercise. Then, read the
following lessons for loading paper, configuring the Control Panel, testing ports, printing
documents, and installing upgrades.
Printer Driver Paper Tray Settings
PHASER 8550, 8500, & 8400 SETUP SECTION
Version 1.0