Color Adjustment Sliders - Xerox 8550YDP - Phaser Color Solid Ink Printer User Manual

Color Adjustment Sliders

The Phaser 8500 and 8550 TekColor driver properties page contains the standard Color Correction settings in
addition to a "More Options" button. Advanced users can choose this feature to adjust colors for the current
Color Correction setting. If one of the "Press Match" settings are selected, the "Apply to CMYK" checkbox
must also be selected in order to implement the slider settings, as shown in the example below.
Customers who are having color problems should begin the troubleshooting process by defaulting the Color
Adjustments (all sliders set to 0.000). They must also be aware that the adjustments always apply to the
active Color Correction setting. For example, a customer may select the Color Correction "None" and then
adjust the sliders to customize the printed output. If the customer changes the Color Correction to
"Automatic", the sliders
"None" will be applied to the "Automatic" setting. Prints generated in this mode will have different colors
when compared to prints that use the "Automatic" Color Correction and no Color Adjustment.
When troubleshooting color issues on Phaser 8500 and 8550 printers,
always begin by resetting the Color Adjustment sliders to 0.000 (default).
PHASER 8550, 8500, & 8400 OVERVIEW SECTION
Version 1.0
will not default to 0.000. Instead, the Color Adjustments previously selected for
Select to customize
the "Press Match" settings
page 25