Repairing The System Mirror And Raid 5 After A Disk Failure - LaCie 5big Storage Server Technical Brief

LaCie Professional Server
Technical Brief: RAID
4. In this example, there is no need to perform the step a second
time since Disk Management will rebuild the System mirror and
the RAID 5 Data configurations at the same
be patient as Resynching
some time.
Fig. 108
9.2. Repairing the System Mirror
and RAID 5 After a Disk Failure
You must recreate the System mirror and/or repair the RAID 5 when
a disk has failed and you receive a replacement disk from LaCie.
IMPORTANT INFO: In the event that an individual hard disk fails
in the LaCie 5big Storage Server, contact your LaCie reseller or
LaCie Customer Support for technical assistance. If the problem
drive was purchased from LaCie and it is within the warranty period,
please replace it with a hard drive provided by LaCie. LaCie will not
replace a non-LaCie hard drive or any hard drive not purchased
from LaCie. Please note that the replacement disk capacity should
be equal to the original disk. While you may use a disk with more
capacity, RAID configurations only recognize the size of the original
disk. This means that the additional capacity of a new disk would
be ignored.
(Fig. 108). Please
the RAID 5 Data volume will take quite
continued on the next page>>
RAID Repair
page 79